[PATCH v2] mtd: davinci-nand: disable subpage write for keystone-nand

[Ivan Khoronzhuk]

From: Murali Karicheri <m-karicheri2 at ti.com>

Sub page write doesn't work because of hw issue in controller found on
Keystone SOCs. AEMIF controller is also used on DaVinci SOCs which
don't seems to have any issue. So add "ti,keysone-nand" compatible
to nand driver in order to set NAND_NO_SUBPAGE_WRITE option.

Cc: Brian Norris <computersforpeace at gmail.com>
Cc: Warner Losh <imp at bsdimp.com>
Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>

Signed-off-by: Murali Karicheri <m-karicheri2 at ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
---

This patch is a result of discussion on patch v1:
https://lkml.org/lkml/2014/3/20/461

 drivers/mtd/nand/davinci_nand.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 4615d79..b922c8e 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -523,6 +523,7 @@ static struct nand_ecclayout hwecc4_2048 = {
 #if defined(CONFIG_OF)
 static const struct of_device_id davinci_nand_of_match[] = {
 	{.compatible = "ti,davinci-nand", },
+	{.compatible = "ti,keystone-nand", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, davinci_nand_of_match);
@@ -581,6 +582,11 @@ static struct davinci_nand_pdata
 		    of_property_read_bool(pdev->dev.of_node,
 			"ti,davinci-nand-use-bbt"))
 			pdata->bbt_options = NAND_BBT_USE_FLASH;
+
+		if (of_device_is_compatible(pdev->dev.of_node,
+					    "ti,keystone-nand")) {
+			pdata->options |= NAND_NO_SUBPAGE_WRITE;
+		}
 	}
 
 	return dev_get_platdata(&pdev->dev);
-- 
1.8.3.2