[PATCH] mtd: nand: omap: ecc.correct: omap_elm_correct_data: return number of bit-flips detected in erased-page

[Ezequiel Garcia]

Pekon,

I'm not sure we need such a detailed subject. Just "mtd: nand: omap:
Return detected bitflip count" should be enough.

This goes for your other patches. It's just a nitpick, of course,
but it's good to have commit log consistency.

On Mar 20, Pekon Gupta wrote:
> fixes: commit 62116e5171e00f85a8d53f76e45b84423c89ff34
>        mtd: nand: omap2: Support for hardware BCH error correction.
> 

Remove these extra whitespace.

> In current omap_elm_correct_data(), an erased-page is also identified based on
> 	'bitflip_count <= ecc.strength' per ecc-step (data+oob)

And this extra tab.

> But bitflip_count is ignored, unless errors are detected in other ecc.steps.
> ------------------
>   if (bitflip_count) {
>         /*
>          * number of 0-bits within ECC limits
>          * So this may be an erased-page
>          */
>         stat += bitflip_count;
>   }
>   [...]
>   /* Check if any error reported */
>   if (!is_error_reported)
>         return 0;
> ------------------
> 

We don't need a piece of code here, we can see that in the patch itself.
The commit log should be a text explaining what you are doing, why you are doing
it and perhaps the impact it has.

I suggest that you clean-up this a bit and resend it.
-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com