[PATCH 4/4] mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding

[Ezequiel Garcia]

This commit updated the devicetree binding documentation for this driver
with the supported ECC strength and step size combinations.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
 Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
index 86e0a56..650c0dc 100644
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
@@ -17,6 +17,14 @@ Optional properties:
  - num-cs:			Number of chipselect lines to usw
  - nand-on-flash-bbt: 		boolean to enable on flash bbt option if
 				not present false
+ - nand-ecc-strength:           number of bits to correct per ECC step
+ - nand-ecc-step-size:          number of data bytes covered by a single ECC step
+
+The following ECC strength and step size are currently supported:
+
+ - nand-ecc-strength = <1>, nand-ecc-step-size = <512>   (aka Hamming)
+ - nand-ecc-strength = <16>, nand-ecc-step-size = <2048> (aka BCH-4)
+ - nand-ecc-strength = <16>, nand-ecc-step-size = <1024> (aka BCH-8)
 
 Example:
 
-- 
1.9.0