[PATCH] mtd: Kconfig: give the CFI command set version in prompt and help

[Lee Jones]

> Enhances the help for the CFI command set choices.
> 
> Signed-off-by: Philippe De Muyter <phdm at macqel.be>
> ---
>  drivers/mtd/chips/Kconfig |   16 ++++++++--------
>  1 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
> index e4696b3..9f02c28 100644
> --- a/drivers/mtd/chips/Kconfig
> +++ b/drivers/mtd/chips/Kconfig
> @@ -169,33 +169,33 @@ config MTD_OTP
>  	  in the programming of OTP bits will waste them.
>  
>  config MTD_CFI_INTELEXT
> -	tristate "Support for Intel/Sharp flash chips"
> +	tristate "Support for CFI command set 0001 (Intel/Sharp chips)"

tristate "Support for Intel/Sharp flash chips (CFI Command Set 0001)"

>  	depends on MTD_GEN_PROBE
>  	select MTD_CFI_UTIL
>  	help
>  	  The Common Flash Interface defines a number of different command
>  	  sets which a CFI-compliant chip may claim to implement. This code
> -	  provides support for one of those command sets, used on Intel
> -	  StrataFlash and other parts.
> +	  provides support for command set 0001, used on Intel StrataFlash
> +	  and other parts.
>  
>  config MTD_CFI_AMDSTD
> -	tristate "Support for AMD/Fujitsu/Spansion flash chips"
> +	tristate "Support for CFI command set 0002 (AMD/Fujitsu/Spansion chips)"

tristate "Support for AMD/Fujitsu/Spansion flash chips (CFI Command Set 0002)"

Etc ... read better for me.

[...]

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog