[PATCH v6 0/4] mtd: devices: elm: add checks ELM H/W constrains, driver code cleanup

[Lee Jones]

> *changes v5 -> v6*
> [PATCH 02/04] minor cleanup
> 
> *changes v4 -> v5*
> This patch series is split version from earlier series [1].
> This series refactors and cleans ELM driver which is used by Hardware
> based BCHx ecc-schemes.
>  - Undo: introduction of 'struct mtd_info' and 'struct nand_chip'. Instead
>          keep ELM driver independent of mtd_info and nand_chip structs and
>          pass only required ECC configurations as elm_config() arguments
>          elm_config(..., int ecc_steps, int ecc_step_size, int ecc_step_bytes)
>  - Undo: re-writing of elm_load_syndrome() ECC register configurations.
> 
> *changes v3 -> v4 [1]*
>  - in-corporated feedbacks from Brian Norris <computersforpeace at gmail.com>
>  - updated: use 'pr_fmt(fmt)' to suffix DRIVER_NAME
>  - removed: local 'eccsteps' in ELM driver, instead using nand_chip->ecc.steps
>  - undo: irrelavant white-space changes
> 
> [1] http://lists.infradead.org/pipermail/linux-mtd/2013-November/050242.html
> 
> Pekon Gupta (4):
>   mtd: devices: elm: check for hardware engine's design constrains
>   mtd: devices: elm: clean elm_load_syndrome
>   mtd: devices: elm: configure parallel channels based on ecc_steps
>   mtd: devices: elm: update DRIVER_NAME as "omap-elm"
> 
>  drivers/mtd/devices/elm.c         | 44 +++++++++++++++++++++++++++++----------
>  drivers/mtd/nand/omap2.c          |  9 +++++---
>  include/linux/platform_data/elm.h | 10 ++-------
>  3 files changed, 41 insertions(+), 22 deletions(-)

I can't seem to be able to apply this set. What kernel release it is
based on?

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog