[PATCH] Disable Subpage nand write when using Atmel PMECC

[Josh Wu]

Hi, Brian

On 3/7/2014 4:02 PM, Brian Norris wrote:
> On Fri, Mar 07, 2014 at 11:59:46AM +0800, Josh Wu wrote:
>> On 3/3/2014 7:15 PM, Herve Codina wrote:
>>> Crash detected on sam5d35 and its pmecc nand ecc controller.
>>>
>>> The problem was a call to chip->ecc.hwctl from nand_write_subpage_hwecc
>>> (nand_base.c) when we write a sub page.
>>> chip->ecc.hwctl function is not set when we are using PMECC controller.
>>> As a workaround, set NAND_NO_SUBPAGE_WRITE for PMECC controller in
>>> order to disable sub page access in nand_write_page.
>>>
>>>
>>> Signed-off-by: Herve Codina <Herve.CODINA at celad.com>
>> Acked-by: Josh Wu <josh.wu at atmel.com>
> Pushed to l2-mtd.git. Thanks!

Sorry for the later thought. But I think this patch should go to the 
stable Linux branch
since any subpage write will cause crash in SAMA5D3 and AT91SAM9X5.
So is it possible to add a tag: "Cc: stable at vger.kernel.org" for this 
commit?

Best Regards,
Josh Wu

>
> Brian