[PATCH v2] mtd: mtd_oobtest: generate consitent data for verification

[Akinobu Mita]

mtd_oobtest writes OOB, read it back and verify.  The verification is
not correctly done if oobsize is not multiple of 4.  Although the data
to be written and the data to be compared are generated by several
prandom_byte_state() calls starting with the same seed, these two are
generated with the different size and different number of calls.

Due to the implementation of prandom_byte_state() if the size on each
call is not multiple of 4, the resulting data is not always same.

This fixes it by just calling prandom_byte_state() once and using
correct range instead of calling it multiple times for each.

Reported-by: George Cherian <george.cherian at ti.com>
Reported-by: Lothar Waßmann <LW at KARO-electronics.de>
Cc: George Cherian <george.cherian at ti.com>
Cc: Lothar Waßmann <LW at KARO-electronics.de>
Cc: David Woodhouse <dwmw2 at infradead.org>
Cc: Brian Norris <computersforpeace at gmail.com>
Cc: linux-mtd at lists.infradead.org
Signed-off-by: Akinobu Mita <akinobu.mita at gmail.com>
---
v2: remove a dependency on unsubmitted patch

 drivers/mtd/tests/oobtest.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c
index 2e9e2d1..c5ea177 100644
--- a/drivers/mtd/tests/oobtest.c
+++ b/drivers/mtd/tests/oobtest.c
@@ -69,8 +69,8 @@ static int write_eraseblock(int ebnum)
 	int err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 
+	prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt);
 	for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
-		prandom_bytes_state(&rnd_state, writebuf, use_len);
 		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
@@ -78,7 +78,7 @@ static int write_eraseblock(int ebnum)
 		ops.oobretlen = 0;
 		ops.ooboffs   = use_offset;
 		ops.datbuf    = NULL;
-		ops.oobbuf    = writebuf;
+		ops.oobbuf    = writebuf + use_len_max * i + use_offset;
 		err = mtd_write_oob(mtd, addr, &ops);
 		if (err || ops.oobretlen != use_len) {
 			pr_err("error: writeoob failed at %#llx\n",
@@ -122,8 +122,8 @@ static int verify_eraseblock(int ebnum)
 	int err = 0;
 	loff_t addr = ebnum * mtd->erasesize;
 
+	prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt);
 	for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
-		prandom_bytes_state(&rnd_state, writebuf, use_len);
 		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
@@ -139,7 +139,8 @@ static int verify_eraseblock(int ebnum)
 			errcnt += 1;
 			return err ? err : -1;
 		}
-		if (memcmp(readbuf, writebuf, use_len)) {
+		if (memcmp(readbuf, writebuf + use_len_max * i + use_offset,
+			   use_len)) {
 			pr_err("error: verify failed at %#llx\n",
 			       (long long)addr);
 			errcnt += 1;
@@ -166,7 +167,9 @@ static int verify_eraseblock(int ebnum)
 				errcnt += 1;
 				return err ? err : -1;
 			}
-			if (memcmp(readbuf + use_offset, writebuf, use_len)) {
+			if (memcmp(readbuf + use_offset,
+				   writebuf + use_len_max * i + use_offset,
+				   use_len)) {
 				pr_err("error: verify failed at %#llx\n",
 						(long long)addr);
 				errcnt += 1;
@@ -566,8 +569,8 @@ static int __init mtd_oobtest_init(void)
 		if (bbt[i] || bbt[i + 1])
 			continue;
 		addr = (i + 1) * mtd->erasesize - mtd->writesize;
+		prandom_bytes_state(&rnd_state, writebuf, sz * cnt);
 		for (pg = 0; pg < cnt; ++pg) {
-			prandom_bytes_state(&rnd_state, writebuf, sz);
 			ops.mode      = MTD_OPS_AUTO_OOB;
 			ops.len       = 0;
 			ops.retlen    = 0;
@@ -575,7 +578,7 @@ static int __init mtd_oobtest_init(void)
 			ops.oobretlen = 0;
 			ops.ooboffs   = 0;
 			ops.datbuf    = NULL;
-			ops.oobbuf    = writebuf;
+			ops.oobbuf    = writebuf + pg * sz;
 			err = mtd_write_oob(mtd, addr, &ops);
 			if (err)
 				goto out;
-- 
1.8.3.2