[PATCH 2/2] mtd: nand: add Hynix's H27UCG8T2ATR-BC to nand_ids table

[Boris BREZILLON]

On Mon, 28 Jul 2014 11:16:52 +0200
Boris BREZILLON <boris.brezillon at free-electrons.com> wrote:

> Add the full description of the Hynix H27UCG8T2ATR-BC NAND chip in the
> nand_ids table so that we can later use the NAND ECC infos and ONFI timings
> mode in controller drivers.
> 
> Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
> ---
>  drivers/mtd/nand/nand_ids.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
> index 3d7c89f..19d4168 100644
> --- a/drivers/mtd/nand/nand_ids.c
> +++ b/drivers/mtd/nand/nand_ids.c
> @@ -46,6 +46,10 @@ struct nand_flash_dev nand_flash_ids[] = {
>  	{"SDTNRGAMA 64G 3.3V 8-bit",
>  		{ .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
>  		  SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
> +	{"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
> +		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
> +		  SZ_8K, SZ_8K, SZ_4M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K),

There is a big mistake here ------^

It should be SZ_2M not SZ_4M, I'll fix that.

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com