[PATCH RFC v4 0/4] Add arm pl353 smc nand driver for xilinx zynq soc

[Punnaiah Choudary Kalluri]

The following patches add arm pl353 static memory controller driver for
xilinx zynq soc. The arm pl353 smc supports two interfaces i.e nand and
nor/sram memory interfaces. The current implementation supports only a
single SMC instance and nand specific configuration.

xilinx zynq TRM link:
http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf

ARM pl353 smc TRM link:
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0380g/
DDI0380G_smc_pl350_series_r2p1_trm.pdf

Punnaiah Choudary Kalluri (4):
  nand: pl353: Add basic driver for arm pl353 smc nand interface
  nand: pl353: Add software ecc support
  nand: pl353: Add ONDIE ECC support
  Documentation: nand: pl353: Add documentation for controller and
    driver

 Documentation/mtd/nand/pl353-nand.txt |   92 +++
 drivers/mtd/nand/Kconfig              |    7 +
 drivers/mtd/nand/Makefile             |    1 +
 drivers/mtd/nand/pl353_nand.c         | 1147 +++++++++++++++++++++++++++++++++
 4 files changed, 1247 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/mtd/nand/pl353-nand.txt
 create mode 100644 drivers/mtd/nand/pl353_nand.c

-- 
1.7.4