[PATCHv4 0/5] mtd: gpmi: make blockmark swapping optional

[Brian Norris]

On Thu, Jun 12, 2014 at 03:20:40PM +0200, Lothar Waßmann wrote:
> With a flash-based BBT there is no reason to move the Factory Bad
> Block Marker from the data area buffer (to where it is mapped by the
> GPMI NAND controller) to the OOB buffer. Thus, make this feature
> configurable via DT. This is required for the Ka-Ro electronics
> i.MX6 platforms.

Pushed patches 1-3 to l2-mtd.git. Thanks!

Brian