[PATH v2] mxc_nand: use our own read_page function
Michael Grzeschik
mgr at pengutronix.de
Mon Jul 14 06:28:37 PDT 2014
@David: Ping!
Some comments on this patch would probably help to get it mainline. :)
Regards,
Michael
On Sat, Jul 05, 2014 at 04:45:21PM +0200, Michael Grzeschik wrote:
> Ping!
>
> On Fri, Jun 27, 2014 at 12:38:44PM +0200, Michael Grzeschik wrote:
> > The current approach of the read_page function is to iterate over all
> > subpages and call the correct_data function. The correct_data function
> > currently does the same. It iterates over all subpages and checks for
> > correctable and uncorrectable data. This redundant call for each
> > subpage leads to miscalculations.
> >
> > This patch changes the driver to use its own read_page function in which
> > we call the correct_data function only once per page. With that we do
> > the failure and correct statistics counting inside this function.
> >
> > Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
> > ---
> > fixed printk to pr_debug
> >
> > drivers/mtd/nand/mxc_nand.c | 73 ++++++++++++++++++++++++++++++++++++++++++---
> > 1 file changed, 69 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
> > index a72d508..5f9e36d 100644
> > --- a/drivers/mtd/nand/mxc_nand.c
> > +++ b/drivers/mtd/nand/mxc_nand.c
> > @@ -141,6 +141,8 @@ struct mxc_nand_host;
> >
> > struct mxc_nand_devtype_data {
> > void (*preset)(struct mtd_info *);
> > + int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
> > + uint8_t *buf, int oob_required, int page);
> > void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
> > void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
> > void (*send_page)(struct mtd_info *, unsigned int);
> > @@ -649,6 +651,59 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
> > return 0;
> > }
> >
> > +/**
> > + * mxc_nand_read_page_hwecc_v2_v3 - [REPLACEABLE] hardware ECC based page read function
> > + * @mtd: mtd info structure
> > + * @chip: nand chip info structure
> > + * @buf: buffer to store read data
> > + * @oob_required: caller requires OOB data read to chip->oob_poi
> > + * @page: page number to read
> > + *
> > + * Not for syndrome calculating ECC controllers which need a special oob layout.
> > + */
> > +static int
> > +mxc_nand_read_page_hwecc_v2_v3(struct mtd_info *mtd,
> > + struct nand_chip *chip,
> > + uint8_t *buf, int oob_required, int page)
> > +{
> > + int i, eccsize = chip->ecc.size;
> > + struct nand_chip *nand_chip = mtd->priv;
> > + struct mxc_nand_host *host = nand_chip->priv;
> > + int eccbytes = chip->ecc.bytes;
> > + int eccsteps = chip->ecc.steps;
> > + uint8_t *p = buf;
> > + uint8_t *ecc_calc = chip->buffers->ecccalc;
> > + uint8_t *ecc_code = chip->buffers->ecccode;
> > + uint32_t *eccpos = chip->ecc.layout->eccpos;
> > + unsigned int max_bitflips = 0;
> > + u32 ecc_stat, err;
> > + int stat;
> > +
> > + ecc_stat = host->devtype_data->get_ecc_status(host);
> > + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
> > + err = ecc_stat & 0xf;
> > + chip->ecc.hwctl(mtd, NAND_ECC_READ);
> > + chip->read_buf(mtd, p, eccsize);
> > + chip->ecc.calculate(mtd, p, &ecc_calc[i]);
> > + ecc_stat >>= 4;
> > +
> > + }
> > + ecc_stat = host->devtype_data->get_ecc_status(host);
> > + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
> > +
> > + for (i = 0; i < chip->ecc.total; i++)
> > + ecc_code[i] = chip->oob_poi[eccpos[i]];
> > +
> > + eccsteps = chip->ecc.steps;
> > + p = buf;
> > +
> > + stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
> > + max_bitflips = max_t(unsigned int, max_bitflips, stat);
> > +
> > + return max_bitflips;
> > +}
> > +
> > +
> > static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
> > u_char *read_ecc, u_char *calc_ecc)
> > {
> > @@ -656,7 +711,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
> > struct mxc_nand_host *host = nand_chip->priv;
> > u32 ecc_stat, err;
> > int no_subpages = 1;
> > - int ret = 0;
> > + int ret = 0, broken = 0;
> > u8 ecc_bit_mask, err_limit = 0x1;
> >
> > ecc_bit_mask = 0xf;
> > @@ -673,15 +728,21 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
> > do {
> > err = ecc_stat & ecc_bit_mask;
> > if (err > err_limit) {
> > - printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
> > - return -1;
> > + broken++;
> > } else {
> > ret += err;
> > }
> > ecc_stat >>= 4;
> > } while (--no_subpages);
> >
> > - pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
> > + mtd->ecc_stats.corrected += ret;
> > + if (ret)
> > + pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
> > +
> > + mtd->ecc_stats.failed += broken;
> > + if (broken)
> > + printk(KERN_WARNING "%d Symbol UnCorrectable RS-ECC Error\n",
> > + broken);
> >
> > return ret;
> > }
> > @@ -1216,6 +1277,7 @@ static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
> > /* v21: i.MX25, i.MX35 */
> > static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
> > .preset = preset_v2,
> > + .read_page = mxc_nand_read_page_hwecc_v2_v3,
> > .send_cmd = send_cmd_v1_v2,
> > .send_addr = send_addr_v1_v2,
> > .send_page = send_page_v2,
> > @@ -1242,6 +1304,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
> > /* v3.2a: i.MX51 */
> > static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
> > .preset = preset_v3,
> > + .read_page = mxc_nand_read_page_hwecc_v2_v3,
> > .send_cmd = send_cmd_v3,
> > .send_addr = send_addr_v3,
> > .send_page = send_page_v3,
> > @@ -1269,6 +1332,7 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
> > /* v3.2b: i.MX53 */
> > static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
> > .preset = preset_v3,
> > + .read_page = mxc_nand_read_page_hwecc_v2_v3,
> > .send_cmd = send_cmd_v3,
> > .send_addr = send_addr_v3,
> > .send_page = send_page_v3,
> > @@ -1483,6 +1547,7 @@ static int mxcnd_probe(struct platform_device *pdev)
> > this->ecc.layout = host->devtype_data->ecclayout_512;
> >
> > if (host->pdata.hw_ecc) {
> > + this->ecc.read_page = host->devtype_data->read_page;
> > this->ecc.calculate = mxc_nand_calculate_ecc;
> > this->ecc.hwctl = mxc_nand_enable_hwecc;
> > this->ecc.correct = host->devtype_data->correct_data;
> > --
> > 2.0.0
> >
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-mtd
mailing list