[PATCH 14/17] mtd: onenand: remove s5pc100 related onenand codes
Brian Norris
computersforpeace at gmail.com
Sat Jul 12 00:12:34 PDT 2014
+ linux-mtd (please CC for anything driver/mtd/*; see MAINTAINERS)
On Tue, Jul 01, 2014 at 06:32:24AM +0900, Kukjin Kim wrote:
> This patch removes s5pc100 related onenand codes because of no more
> support for S5PC100 SoC in mainline.
>
> Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
> Cc: Kyungmin Park <kyungmin.park at samsung.com>
> Cc: David Woodhouse <dwmw2 at infradead.org>
> Cc: Brian Norris <computersforpeace at gmail.com>
> ---
> drivers/mtd/onenand/Kconfig | 4 ++--
> drivers/mtd/onenand/samsung.c | 25 +------------------------
> 2 files changed, 3 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
> index ab26072..dcae2f6 100644
> --- a/drivers/mtd/onenand/Kconfig
> +++ b/drivers/mtd/onenand/Kconfig
> @@ -32,10 +32,10 @@ config MTD_ONENAND_OMAP2
>
> config MTD_ONENAND_SAMSUNG
> tristate "OneNAND on Samsung SOC controller support"
> - depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4
> + depends on ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS4
> help
> Support for a OneNAND flash device connected to an Samsung SOC.
> - S3C64XX/S5PC100 use command mapping method.
> + S3C64XX uses command mapping method.
> S5PC110/S5PC210 use generic OneNAND method.
>
> config MTD_ONENAND_OTP
> diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
> index efb819c..19cfb97 100644
> --- a/drivers/mtd/onenand/samsung.c
> +++ b/drivers/mtd/onenand/samsung.c
> @@ -10,7 +10,7 @@
> * published by the Free Software Foundation.
> *
> * Implementation:
> - * S3C64XX and S5PC100: emulate the pseudo BufferRAM
> + * S3C64XX: emulate the pseudo BufferRAM
> * S5PC110: use DMA
> */
>
> @@ -32,7 +32,6 @@
> enum soc_type {
> TYPE_S3C6400,
> TYPE_S3C6410,
> - TYPE_S5PC100,
> TYPE_S5PC110,
> };
>
> @@ -59,7 +58,6 @@ enum soc_type {
> #define MAP_11 (0x3)
>
> #define S3C64XX_CMD_MAP_SHIFT 24
> -#define S5PC100_CMD_MAP_SHIFT 26
>
> #define S3C6400_FBA_SHIFT 10
> #define S3C6400_FPA_SHIFT 4
> @@ -69,10 +67,6 @@ enum soc_type {
> #define S3C6410_FPA_SHIFT 6
> #define S3C6410_FSA_SHIFT 4
>
> -#define S5PC100_FBA_SHIFT 13
> -#define S5PC100_FPA_SHIFT 7
> -#define S5PC100_FSA_SHIFT 5
> -
> /* S5PC110 specific definitions */
> #define S5PC110_DMA_SRC_ADDR 0x400
> #define S5PC110_DMA_SRC_CFG 0x404
> @@ -195,11 +189,6 @@ static unsigned int s3c64xx_cmd_map(unsigned type, unsigned val)
> return (type << S3C64XX_CMD_MAP_SHIFT) | val;
> }
>
> -static unsigned int s5pc1xx_cmd_map(unsigned type, unsigned val)
> -{
> - return (type << S5PC100_CMD_MAP_SHIFT) | val;
> -}
> -
> static unsigned int s3c6400_mem_addr(int fba, int fpa, int fsa)
> {
> return (fba << S3C6400_FBA_SHIFT) | (fpa << S3C6400_FPA_SHIFT) |
> @@ -212,12 +201,6 @@ static unsigned int s3c6410_mem_addr(int fba, int fpa, int fsa)
> (fsa << S3C6410_FSA_SHIFT);
> }
>
> -static unsigned int s5pc100_mem_addr(int fba, int fpa, int fsa)
> -{
> - return (fba << S5PC100_FBA_SHIFT) | (fpa << S5PC100_FPA_SHIFT) |
> - (fsa << S5PC100_FSA_SHIFT);
> -}
> -
> static void s3c_onenand_reset(void)
> {
> unsigned long timeout = 0x10000;
> @@ -835,9 +818,6 @@ static void s3c_onenand_setup(struct mtd_info *mtd)
> } else if (onenand->type == TYPE_S3C6410) {
> onenand->mem_addr = s3c6410_mem_addr;
> onenand->cmd_map = s3c64xx_cmd_map;
> - } else if (onenand->type == TYPE_S5PC100) {
> - onenand->mem_addr = s5pc100_mem_addr;
> - onenand->cmd_map = s5pc1xx_cmd_map;
> } else if (onenand->type == TYPE_S5PC110) {
> /* Use generic onenand functions */
> this->read_bufferram = s5pc110_read_bufferram;
> @@ -1111,9 +1091,6 @@ static struct platform_device_id s3c_onenand_driver_ids[] = {
> .name = "s3c6410-onenand",
> .driver_data = TYPE_S3C6410,
> }, {
> - .name = "s5pc100-onenand",
> - .driver_data = TYPE_S5PC100,
> - }, {
> .name = "s5pc110-onenand",
> .driver_data = TYPE_S5PC110,
> }, { },
> --
> 1.7.10.4
>
More information about the linux-mtd
mailing list