[PATCH 2/3] mtd: hisilicon: add a new nand controller driver for hisilicon hip04 Soc
Zhou Wang
wangzhou.bry at gmail.com
Tue Jul 1 19:09:43 PDT 2014
On 2014年06月30日 17:45, Ivan Khoronzhuk wrote:
>
> On 06/30/2014 11:03 AM, Zhou Wang wrote:
>> Signed-off-by: Zhou Wang <wangzhou.bry at gmail.com>
>> ---
>> drivers/mtd/nand/Kconfig | 5 +
>> drivers/mtd/nand/Makefile | 1 +
>> drivers/mtd/nand/hisi_nand.c | 847
>> ++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 853 insertions(+)
>> create mode 100644 drivers/mtd/nand/hisi_nand.c
>>
>> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
>> index 90ff447..253f8c8 100644
>> --- a/drivers/mtd/nand/Kconfig
>> +++ b/drivers/mtd/nand/Kconfig
>> @@ -510,4 +510,9 @@ config MTD_NAND_XWAY
>> Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND
>> is attached
>> to the External Bus Unit (EBU).
>> +config MTD_NAND_HISI
>> + tristate "Support for NAND controller on Hisilicon SoC"
>> + help
>> + Enables support for NAND controller on Hisilicon SoC.
>> +
>> endif # MTD_NAND
>> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
>> index 542b568..d0881cf 100644
>> --- a/drivers/mtd/nand/Makefile
>> +++ b/drivers/mtd/nand/Makefile
>> @@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
>> obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
>> obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
>> obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
>> +obj-$(CONFIG_MTD_NAND_HISI) += hisi_nand.o
>> nand-objs := nand_base.o nand_bbt.o
>> diff --git a/drivers/mtd/nand/hisi_nand.c b/drivers/mtd/nand/hisi_nand.c
>> new file mode 100644
>> index 0000000..fbcb065
>> --- /dev/null
>> +++ b/drivers/mtd/nand/hisi_nand.c
>> @@ -0,0 +1,847 @@
>> +/*
>> + * Hisilicon NAND Flash controller driver
>> + *
>> + * Copyright © 2012-2014 HiSilicon Technologies Co., Ltd.
>> + * http://www.hisilicon.com
>> + *
>> + * Author: Zhou Wang <wangzhou.bry at gmail.com>
>> + * The initial developer of the original code is Zhiyong Cai
>> + * <caizhiyong at huawei.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +#include <linux/of.h>
>> +#include <linux/of_mtd.h>
>> +#include <linux/mtd/mtd.h>
>> +#include <linux/sizes.h>
>> +#include <linux/clk.h>
>> +#include <linux/slab.h>
>> +#include <linux/module.h>
>> +#include <linux/delay.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/mtd/nand.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/mtd/partitions.h>
>> +
>> +#define HINFC504_MAX_CHIP (4)
>> +#define HINFC504_W_LATCH (5)
>> +#define HINFC504_R_LATCH (7)
>> +#define HINFC504_RW_LATCH (3)
>> +
>> +#define HINFC504_NFC_TIMEOUT (2 * HZ)
>> +#define HINFC504_NFC_DMA_TIMEOUT (5 * HZ)
>> +#define HINFC504_CHIP_DELAY (25)
>> +
>> +#define HINFC504_REG_BASE_ADDRESS_LEN (0x100)
>> +#define HINFC504_BUFFER_BASE_ADDRESS_LEN (2048 + 128)
>> +
>> +#define HINFC504_ADDR_CYCLE_MASK 0x4
>> +
>> +#define HINFC504_CON 0x00
>> +#define HINFC504_CON_OP_MODE_NORMAL (1U << 0)
>> +#define HINFC504_CON_PAGEISZE_SHIFT (1)
>> +#define HINFC504_CON_PAGESIZE_MASK (0x07)
>> +#define HINFC504_CON_BUS_WIDTH (1U << 4)
>> +#define HINFC504_CON_READY_BUSY_SEL (1U << 8)
>> +#define HINFC504_CON_ECCTYPE_SHIFT (9)
>> +#define HINFC504_CON_ECCTYPE_MASK (0x07)
>> +
>> +#define HINFC504_PWIDTH 0x04
>> +#define SET_HINFC504_PWIDTH(_w_lcnt, _r_lcnt, _rw_hcnt) \
>> + ((_w_lcnt) | (((_r_lcnt) & 0x0F) << 4) | (((_rw_hcnt) & 0x0F) << 8))
>> +
>> +#define HINFC504_CMD 0x0C
>> +#define HINFC504_ADDRL 0x10
>> +#define HINFC504_ADDRH 0x14
>> +#define HINFC504_DATA_NUM 0x18
>> +
>> +#define HINFC504_OP 0x1C
>> +#define HINFC504_OP_READ_DATA_EN (1U << 1)
>> +#define HINFC504_OP_WAIT_READY_EN (1U << 2)
>> +#define HINFC504_OP_CMD2_EN (1U << 3)
>> +#define HINFC504_OP_WRITE_DATA_EN (1U << 4)
>> +#define HINFC504_OP_ADDR_EN (1U << 5)
>> +#define HINFC504_OP_CMD1_EN (1U << 6)
>> +#define HINFC504_OP_NF_CS_SHIFT (7)
>> +#define HINFC504_OP_NF_CS_MASK (3)
>> +#define HINFC504_OP_ADDR_CYCLE_SHIFT (9)
>> +#define HINFC504_OP_ADDR_CYCLE_MASK (7)
>> +
>> +#define HINFC504_STATUS 0x20
>> +#define HINFC504_READY (1U << 0)
>> +
>> +#define HINFC504_INTEN 0x24
>> +#define HINFC504_INTEN_DMA (1U << 9)
>> +#define HINFC504_INTEN_UE (1U << 6)
>> +#define HINFC504_INTEN_CE (1U << 5)
>> +
>> +#define HINFC504_INTS 0x28
>> +#define HINFC504_INTS_DMA (1U << 9)
>> +#define HINFC504_INTS_UE (1U << 6)
>> +#define HINFC504_INTS_CE (1U << 5)
>> +
>> +#define HINFC504_INTCLR 0x2C
>> +#define HINFC504_INTCLR_DMA (1U << 9)
>> +#define HINFC504_INTCLR_UE (1U << 6)
>> +#define HINFC504_INTCLR_CE (1U << 5)
>> +
>> +#define HINFC504_ECC_STATUS 0x5C
>> +#define HINFC504_ECC_1_BIT_SHIFT 16
>> +#define HINFC504_ECC_16_BIT_SHIFT 12
>> +
>> +#define HINFC504_DMA_CTRL 0x60
>> +#define HINFC504_DMA_CTRL_DMA_START (1U << 0)
>> +#define HINFC504_DMA_CTRL_WE (1U << 1)
>> +#define HINFC504_DMA_CTRL_DATA_AREA_EN (1U << 2)
>> +#define HINFC504_DMA_CTRL_OOB_AREA_EN (1U << 3)
>> +#define HINFC504_DMA_CTRL_BURST4_EN (1U << 4)
>> +#define HINFC504_DMA_CTRL_BURST8_EN (1U << 5)
>> +#define HINFC504_DMA_CTRL_BURST16_EN (1U << 6)
>> +#define HINFC504_DMA_CTRL_ADDR_NUM_SHIFT (7)
>> +#define HINFC504_DMA_CTRL_ADDR_NUM_MASK (1)
>> +#define HINFC504_DMA_CTRL_CS_SHIFT (8)
>> +#define HINFC504_DMA_CTRL_CS_MASK (0x03)
>> +
>> +#define HINFC504_DMA_ADDR_DATA 0x64
>> +#define HINFC504_DMA_ADDR_OOB 0x68
>> +
>> +#define HINFC504_DMA_LEN 0x6C
>> +#define HINFC504_DMA_LEN_OOB_SHIFT (16)
>> +#define HINFC504_DMA_LEN_OOB_MASK (0xFFF)
>> +
>> +#define HINFC504_DMA_PARA 0x70
>> +#define HINFC504_DMA_PARA_DATA_RW_EN (1U << 0)
>> +#define HINFC504_DMA_PARA_OOB_RW_EN (1U << 1)
>> +#define HINFC504_DMA_PARA_DATA_EDC_EN (1U << 2)
>> +#define HINFC504_DMA_PARA_OOB_EDC_EN (1U << 3)
>> +#define HINFC504_DMA_PARA_DATA_ECC_EN (1U << 4)
>> +#define HINFC504_DMA_PARA_OOB_ECC_EN (1U << 5)
>> +
>> +#define HINFC_VERSION 0x74
>> +#define HINFC504_LOG_READ_ADDR 0x7C
>> +#define HINFC504_LOG_READ_LEN 0x80
>> +
>> +#define HINFC504_NANDINFO_LEN 0x10
>> +
>> +#define hinfc_read(_host, _reg) readl(_host->iobase + (_reg))
>> +#define hinfc_write(_host, _value, _reg)\
>> + writel((_value), _host->iobase + (_reg))
>> +
>> +struct hinfc_host {
>> + struct nand_chip *chip;
>> + struct mtd_info *mtd;
>> + struct device *dev;
>> + void __iomem *iobase;
>> + struct completion cmd_complete;
>> + unsigned int offset;
>> + unsigned int command;
>> + int chipselect;
>> + unsigned int addr_cycle;
>> + unsigned int addr_value[2];
>> + unsigned int cache_addr_value[2];
>> + char *buffer;
>> + dma_addr_t dma_buffer;
>> + dma_addr_t dma_oob;
>> + int version;
>> + unsigned int ecc_bits;
>> + unsigned int irq_status; /* interrupt status */
>> +
>> + int (*send_cmd_pageprog)(struct hinfc_host *host);
>> + int (*send_cmd_status)(struct hinfc_host *host);
>> + int (*send_cmd_readstart)(struct hinfc_host *host);
>> + int (*send_cmd_erase)(struct hinfc_host *host);
>> + int (*send_cmd_readid)(struct hinfc_host *host);
>> + int (*send_cmd_reset)(struct hinfc_host *host, int chipselect);
>> +};
>> +
>> +void wait_controller_finished(struct hinfc_host *host)
>> +{
>> + unsigned long timeout = jiffies + HINFC504_NFC_TIMEOUT;
>> + int val;
>> +
>> + while (time_before(jiffies, timeout)) {
>> + val = hinfc_read(host, HINFC504_STATUS);
>> + if (host->command == NAND_CMD_ERASE2) {
>> + /* nfc is ready */
>> + while (!(val & HINFC504_READY)) {
>> + usleep_range(500, 1000);
>> + val = hinfc_read(host, HINFC504_STATUS);
>> + }
>> + return;
>> + } else {
>> + if (val & HINFC504_READY)
>> + return;
>> + }
>> + }
>> +
>> + /* wait cmd timeout */
>> + dev_err(host->dev, "Wait NAND controller exec cmd timeout.\n");
>> +}
>> +
>> +static void hisi_nfc_dma_transfer(struct hinfc_host *host, int todev)
>> +{
>> + struct mtd_info *mtd = host->mtd;
>> + struct nand_chip *chip = mtd->priv;
>> + unsigned long val;
>> + int ret;
>> +
>> + hinfc_write(host, host->dma_buffer, HINFC504_DMA_ADDR_DATA);
>> + hinfc_write(host, host->dma_oob, HINFC504_DMA_ADDR_OOB);
>> +
>> + if (chip->ecc.mode == NAND_ECC_NONE) {
>> + hinfc_write(host, ((mtd->oobsize & HINFC504_DMA_LEN_OOB_MASK)
>> + << HINFC504_DMA_LEN_OOB_SHIFT), HINFC504_DMA_LEN);
>> +
>> + hinfc_write(host, HINFC504_DMA_PARA_DATA_RW_EN
>> + | HINFC504_DMA_PARA_OOB_RW_EN, HINFC504_DMA_PARA);
>> + } else
>
> Add {} for else also
> ./scripts/checkpatch.pl.
>
ok, I will add them, thanks.
More information about the linux-mtd
mailing list