[RFC PATCH 0/9] mtd: nand: add sunxi NAND Flash Controller support

[Rob Herring]

On Sat, Jan 11, 2014 at 7:38 AM, boris brezillon
<b.brezillon at overkiz.com> wrote:
> On 08/01/2014 15:21, Boris BREZILLON wrote:
>>
>> Hello,
>>
>> This series add the sunxi NFC support with up to 8 NAND chip connected.
>> I'm still in the early stages drivers development and some key features
>> are
>> missing, but it's usable (I tested it on the cubietruck board).
>>
>> Here's what's missing:
>>   - HW ECC support
>>   - DMA support
>>   - HW randomization support
>>   - many more improvements
>>
>> This series depends on Emilio's patch series implementing mod0 clks
>>
>> (http://lists.infradead.org/pipermail/linux-arm-kernel/2013-July/185478.html)
>> + an other patch not yet posted
>>
>> (http://git.elopez.com.ar/linux/commits/5b4eb3ac406b9c98965714d40e8dd6da943d1ab0)
>
>
> During my reasearch regarding the HW ECC and HW randomizer of the Allwinner
> NAND flash controller I found this document describing the Altera NAND flash
> controller
> (which is in turn based on a cadence IP):

Which may be similar to drivers/mtd/nand/denali.c as Cadence bought Denali?

Rob