[PATCH RESEND v4 35/37] mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back
Lee Jones
lee.jones at linaro.org
Thu Jan 23 05:31:23 EST 2014
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
drivers/mtd/devices/st_spi_fsm.c | 47 ++++++++++++++++++++++++++++++++++++----
1 file changed, 43 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 88017d8..ddfff35 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -339,6 +339,7 @@ struct flash_info {
static int stfsm_n25q_config(struct stfsm *fsm);
static int stfsm_mx25_config(struct stfsm *fsm);
static int stfsm_s25fl_config(struct stfsm *fsm);
+static int stfsm_w25q_config(struct stfsm *fsm);
static struct flash_info flash_types[] = {
/*
@@ -444,10 +445,14 @@ static struct flash_info flash_types[] = {
FLASH_FLAG_READ_1_1_4 | \
FLASH_FLAG_READ_1_4_4 | \
FLASH_FLAG_WRITE_1_1_4)
- { "w25q80", 0xef4014, 0, 64 * 1024, 16, W25Q_FLAG, 80, NULL },
- { "w25q16", 0xef4015, 0, 64 * 1024, 32, W25Q_FLAG, 80, NULL },
- { "w25q32", 0xef4016, 0, 64 * 1024, 64, W25Q_FLAG, 80, NULL },
- { "w25q64", 0xef4017, 0, 64 * 1024, 128, W25Q_FLAG, 80, NULL },
+ { "w25q80", 0xef4014, 0, 64 * 1024, 16, W25Q_FLAG, 80,
+ stfsm_w25q_config },
+ { "w25q16", 0xef4015, 0, 64 * 1024, 32, W25Q_FLAG, 80,
+ stfsm_w25q_config },
+ { "w25q32", 0xef4016, 0, 64 * 1024, 64, W25Q_FLAG, 80,
+ stfsm_w25q_config },
+ { "w25q64", 0xef4017, 0, 64 * 1024, 128, W25Q_FLAG, 80,
+ stfsm_w25q_config },
/* Sentinel */
{ NULL, 0x000000, 0, 0, 0, 0, 0, NULL },
@@ -575,6 +580,11 @@ static struct seq_rw_config stfsm_s25fl_write4_configs[] = {
{0x00, 0, 0, 0, 0, 0x00, 0, 0},
};
+/*
+ * [W25Qxxx] Configuration
+ */
+#define W25Q_STATUS_QE (0x1 << 9)
+
static struct stfsm_seq stfsm_seq_read; /* Dynamically populated */
static struct stfsm_seq stfsm_seq_write; /* Dynamically populated */
static struct stfsm_seq stfsm_seq_en_32bit_addr;/* Dynamically populated */
@@ -1433,6 +1443,35 @@ static int stfsm_s25fl_config(struct stfsm *fsm)
return 0;
}
+static int stfsm_w25q_config(struct stfsm *fsm)
+{
+ uint32_t data_pads;
+ uint16_t sta_wr;
+ uint8_t sta1, sta2;
+ int ret;
+
+ ret = stfsm_prepare_rwe_seqs_default(fsm);
+ if (ret)
+ return ret;
+
+ /* If using QUAD mode, set QE STATUS bit */
+ data_pads = ((stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
+ if (data_pads == 4) {
+ stfsm_read_status(fsm, FLASH_CMD_RDSR, &sta1);
+ stfsm_read_status(fsm, FLASH_CMD_RDSR2, &sta2);
+
+ sta_wr = ((uint16_t)sta2 << 8) | sta1;
+
+ sta_wr |= W25Q_STATUS_QE;
+
+ stfsm_write_status(fsm, sta_wr, 2);
+
+ stfsm_wait_busy(fsm);
+ }
+
+ return 0;
+}
+
static int stfsm_read(struct stfsm *fsm, uint8_t *buf, uint32_t size,
uint32_t offset)
{
--
1.8.3.2
More information about the linux-mtd
mailing list