[PATCH] mtd: m25p80: Make the name of mtd_info fixed

Brian Norris computersforpeace at gmail.com
Wed Jan 22 21:12:13 EST 2014


Hi Hou,

On Mon, Jan 06, 2014 at 02:34:29PM +0800, Hou Zhiqiang wrote:
> To give spi flash layout using "mtdparts=..." in cmdline, we must
> give mtd_info a fixed name,because the cmdlinepart's parser will
> match the name given in cmdline with the mtd_info.
> 
> Now, if use OF node, mtd_info's name will be spi->dev->name. It
> consists of spi_master->bus_num, and the spi_master->bus_num maybe
> dynamically fetched.
> So, give the mtd_info a new fiexd name "name.cs", "name" is name of
> spi_device_id and "cs" is chip-select in spi_dev.
> 
> Signed-off-by: Hou Zhiqiang <b48286 at freescale.com>
> ---
>  drivers/mtd/devices/m25p80.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index eb558e8..d1ed480 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -1012,7 +1012,8 @@ static int m25p_probe(struct spi_device *spi)
>  	if (data && data->name)
>  		flash->mtd.name = data->name;
>  	else
> -		flash->mtd.name = dev_name(&spi->dev);
> +		flash->mtd.name = kasprintf(GFP_KERNEL, "%s.%d",
> +				id->name, spi->chip_select);

Changing the mtd.name may have far-reaching consequences for users who
already have mtdparts= command lines. But your concern is probably valid
for dynamically-determined bus numbers. Perhaps you can edit this patch
to only change the name when the busnum is dynamically-allocated?

This also needs a NULL check (for OOM), and you leak memory on device
removal.

>  
>  	flash->mtd.type = MTD_NORFLASH;
>  	flash->mtd.writesize = 1;

Brian



More information about the linux-mtd mailing list