[PATCH v5 1/4] mtd: nand: omap: ecc.calculate: rename omap3_calculate_ecc_bch to omap_calculate_ecc_bch

Pekon Gupta pekon at ti.com
Tue Jan 7 08:45:43 EST 2014


This patch renames omap3_calculate_ecc_bch -> omap_calculate_ecc_bch to
keep nomenclature independent of any device family.

Signed-off-by: Pekon Gupta <pekon at ti.com>
---
 drivers/mtd/nand/omap2.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index c690721..bf9bf7e 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1211,15 +1211,15 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
 
 #ifdef CONFIG_MTD_NAND_OMAP_BCH
 /**
- * omap3_calculate_ecc_bch - Generate bytes of ECC bytes
+ * omap_calculate_ecc_bch - Generate bytes of ECC bytes
  * @mtd:	MTD device structure
  * @dat:	The pointer to data on which ecc is computed
  * @ecc_code:	The ecc_code buffer
  *
  * Support calculating of BCH4/8 ecc vectors for the page
  */
-static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat,
-				    u_char *ecc_code)
+static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
+					const u_char *dat, u_char *ecc_code)
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
@@ -1858,7 +1858,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 4;
 		nand_chip->ecc.hwctl		= omap3_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap3_calculate_ecc_bch;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
 		/* define ECC layout */
@@ -1929,7 +1929,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 8;
 		nand_chip->ecc.hwctl		= omap3_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap3_calculate_ecc_bch;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
 		/* This ECC scheme requires ELM H/W block */
-- 
1.8.1




More information about the linux-mtd mailing list