[PATCH] mtd: omap2: use nand_base defaults for polled I/O

[Gupta, Pekon]

>From: Brian Norris [mailto:computersforpeace at gmail.com]
>
>The omap_{read,write}_buf{8,16}() functions are identical to the default
>nand_base versions. Just let nand_base assign them in the
>NAND_OMAP_POLLED case.
>
>Signed-off-by: Brian Norris <computersforpeace at gmail.com>
>---
>Compile tested only
>
> drivers/mtd/nand/omap2.c | 8 +-------
> 1 file changed, 1 insertion(+), 7 deletions(-)
>
>diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
>index e9e2c37c0a80..eadc76a57f45 100644
>--- a/drivers/mtd/nand/omap2.c
>+++ b/drivers/mtd/nand/omap2.c
>@@ -1730,13 +1730,7 @@ static int omap_nand_probe(struct platform_device *pdev)
> 		break;
>
> 	case NAND_OMAP_POLLED:
>-		if (nand_chip->options & NAND_BUSWIDTH_16) {
>-			nand_chip->read_buf   = omap_read_buf16;
>-			nand_chip->write_buf  = omap_write_buf16;
>-		} else {
>-			nand_chip->read_buf   = omap_read_buf8;
>-			nand_chip->write_buf  = omap_write_buf8;
>-		}
>+		/* Use nand_base defaults for {read,write}_buf */
> 		break;
>
> 	case NAND_OMAP_PREFETCH_DMA:
>--
>1.8.3.2

Tested-by: Pekon Gupta <pekon at ti.com>


with regards, pekon