[PATCH v3 09/13] mtd: st_spi_fsm: Update Spansion device entries

[Lee Jones]

From: Angus Clark <angus.clark at st.com>

This patch updates various Spansion device entries in the flash_types[] table:
  - Define full 6-byte READIDs for S25FL128Sx devices (and fix the 4th
    byte). This allows us to differentiate between S25FL129P and S25FL128S
    devices.
  - Add S25FL128Px device entries.

Signed-off-by: Angus Clark <angus.clark at st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso at st.com>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/mtd/devices/st_spi_fsm.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 949745a..7c024ec 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -483,6 +483,7 @@ static struct flash_info flash_types[] = {
 	/*
 	 * Spansion S25FLxxxP
 	 *     - 256KiB and 64KiB sector variants (identified by ext. JEDEC)
+	 *     - S25FL128Px devices do not support DUAL or QUAD I/O
 	 */
 #define S25FLXXXP_FLAG (FLASH_FLAG_READ_WRITE  |	\
 			FLASH_FLAG_READ_1_1_2   |	\
@@ -493,6 +494,12 @@ static struct flash_info flash_types[] = {
 			FLASH_FLAG_READ_FAST)
 	RDID_INFO("s25fl032p", RDID({0x01, 0x02, 0x15, 0x4d, 0x00}), 5,
 		  64 * 1024,  64, S25FLXXXP_FLAG, 80, stfsm_s25fl_config),
+	RDID_INFO("s25fl128p1", RDID({0x01, 0x20, 0x18, 0x03, 0x00}), 5,
+		  256 * 1024, 64,
+		  (FLASH_FLAG_READ_WRITE | FLASH_FLAG_READ_FAST), 104, NULL),
+	RDID_INFO("s25fl128p0", RDID({0x01, 0x20, 0x18, 0x03, 0x01}), 5,
+		  64 * 1024, 256,
+		  (FLASH_FLAG_READ_WRITE | FLASH_FLAG_READ_FAST), 104, NULL),
 	RDID_INFO("s25fl129p0", RDID({0x01, 0x20, 0x18, 0x4d, 0x00}), 5,
 		  256 * 1024,  64, S25FLXXXP_FLAG, 80, stfsm_s25fl_config),
 	RDID_INFO("s25fl129p1", RDID({0x01, 0x20, 0x18, 0x4d, 0x01}), 5,
@@ -506,17 +513,18 @@ static struct flash_info flash_types[] = {
 	 *       so this information is captured in the board's flags.
 	 *     - Supports 'DYB' sector protection. Depending on variant, sectors
 	 *       may default to locked state on power-on.
+	 *     - S25FL127Sx handled as S25FL128Sx
 	 */
 #define S25FLXXXS_FLAG (S25FLXXXP_FLAG         |	\
 			FLASH_FLAG_RESET        |	\
 			FLASH_FLAG_DYB_LOCKING)
-	RDID_INFO("s25fl128s0", RDID({0x01, 0x20, 0x18, 0x03, 0x00}), 5,
+	RDID_INFO("s25fl128s0", RDID({0x01, 0x20, 0x18, 0x4d, 0x00, 0x80}), 6,
 		  256 * 1024, 64, S25FLXXXS_FLAG, 80, stfsm_s25fl_config),
-	RDID_INFO("s25fl128s1", RDID({0x01, 0x20, 0x18, 0x03, 0x01}), 5,
+	RDID_INFO("s25fl128s1", RDID({0x01, 0x20, 0x18, 0x4d, 0x01, 0x80}), 6,
 		  64 * 1024, 256, S25FLXXXS_FLAG, 80, stfsm_s25fl_config),
-	RDID_INFO("s25fl256s0", RDID({0x01, 0x02, 0x19, 0x4d, 0x00}), 5,
+	RDID_INFO("s25fl256s0", RDID({0x01, 0x02, 0x19, 0x4d, 0x00, 0x80}), 6,
 		  256 * 1024, 128, S25FLXXXS_FLAG, 80, stfsm_s25fl_config),
-	RDID_INFO("s25fl256s1", RDID({0x01, 0x02, 0x19, 0x4d, 0x01}), 5,
+	RDID_INFO("s25fl256s1", RDID({0x01, 0x02, 0x19, 0x4d, 0x01, 0x80}), 6,
 		  64 * 1024, 512, S25FLXXXS_FLAG, 80, stfsm_s25fl_config),
 
 #define W25X_FLAG (FLASH_FLAG_READ_WRITE       |	\
-- 
1.9.1