[PATCH 2/3] mtd: nand: added nand_shutdown

[Brian Norris]

From: Scott Branden <sbranden at broadcom.com>

Add nand_shutdown to wait for current nand operations to finish and prevent
further operations by changing the nand flash state to FL_SHUTDOWN.

This is addressing a problem observed during reboot tests using UBIFS
root file system: NAND erase operations that are in progress during
system reboot/shutdown are causing partial erased blocks. Although UBI should
be able to detect and recover from this error, this change will avoid
the creation of partial erased blocks on reboot in the middle of a NAND erase
operation.

Signed-off-by: Scott Branden <sbranden at broadcom.com>
Signed-off-by: Brian Norris <computersforpeace at gmail.com>
---
Modified to use the new mtd->_reboot hook

Not tested yet

 drivers/mtd/nand/nand_base.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 41585dfb206f..382354b5547b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2944,6 +2944,16 @@ static void nand_resume(struct mtd_info *mtd)
 			__func__);
 }
 
+/**
+ * nand_shutdown - [MTD Interface] Finish the current NAND operation and
+ *                 prevent further operations
+ * @mtd: MTD device structure
+ */
+static void nand_shutdown(struct mtd_info *mtd)
+{
+	nand_get_device(mtd, FL_SHUTDOWN);
+}
+
 /* Set default functions */
 static void nand_set_defaults(struct nand_chip *chip, int busw)
 {
@@ -4146,6 +4156,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 	mtd->_unlock = NULL;
 	mtd->_suspend = nand_suspend;
 	mtd->_resume = nand_resume;
+	mtd->_reboot = nand_shutdown;
 	mtd->_block_isreserved = nand_block_isreserved;
 	mtd->_block_isbad = nand_block_isbad;
 	mtd->_block_markbad = nand_block_markbad;
-- 
1.9.1