[PATCH 1/1] mtd: cfi_cmdset_0002:add fixup for Micron M29EW after erase operation

[Jingoo Han]

On Monday, September 01, 2014 11:21 AM, Bean Huo wrote:
> 
> For Micron M29EW,20ms delay is needed after erase operation.

You already added the reason to cfi_fixup_m29ew_delay_after_erase().
However, please add the comment to this commit message.

> 
> Signed-off-by: BeanHuo <bpqw at micron.com>

BeanHuo/Bean Huo

Others look good.

Best regards,
Jingoo Han

> ---
>  drivers/mtd/chips/cfi_cmdset_0002.c |   11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
> index 5a4bfe3..9b0de91 100644
> --- a/drivers/mtd/chips/cfi_cmdset_0002.c
> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
> @@ -509,6 +509,16 @@ static void cfi_fixup_m29ew_delay_after_resume(struct cfi_private *cfi)
>  		cfi_udelay(500);
>  }
> 
> +static void cfi_fixup_m29ew_delay_after_erase(struct cfi_private *cfi)
> +{
> +	/*
> +	 * Resolving the Delay After ERASE Issue @low temperature.
> +	 * 20ms delay is needed after erase operation.
> +	 */
> +	if (is_m29ew(cfi))
> +		cfi_udelay(20000);
> +}
> +
>  struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)  {
>  	struct cfi_private *cfi = map->fldrv_priv; @@ -2397,6 +2407,7 @@ static int __xipram
> do_erase_oneblock(struct map_info *map, struct flchip *chip,
>  		ret = -EIO;
>  	}
> 
> +	cfi_fixup_m29ew_delay_after_erase(cfi);
>  	chip->state = FL_READY;
>  	DISABLE_VPP(map);
>  	put_chip(map, chip, adr);
> --
> 1.7.9.5