[PATCH] mtd: nand: don't break long print messages
Rafał Miłecki
zajec5 at gmail.com
Tue Aug 19 04:55:34 PDT 2014
This follows Chapter 2 of Linux's CodingStyle:
> However, never break user-visible strings such as printk messages,
> because that breaks the ability to grep for them.
Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
---
drivers/mtd/nand/nand_base.c | 14 +++++---------
drivers/mtd/nand/nand_bbt.c | 23 ++++++++++-------------
2 files changed, 15 insertions(+), 22 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ae6e7c4..801cad1 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3936,8 +3936,7 @@ int nand_scan_tail(struct mtd_info *mtd)
case NAND_ECC_HW_OOB_FIRST:
/* Similar to NAND_ECC_HW, but a separate read_page handle */
if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
- pr_warn("No ECC functions supplied; "
- "hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; hardware ECC not possible\n");
BUG();
}
if (!ecc->read_page)
@@ -3968,8 +3967,7 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->read_page == nand_read_page_hwecc ||
!ecc->write_page ||
ecc->write_page == nand_write_page_hwecc)) {
- pr_warn("No ECC functions supplied; "
- "hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; hardware ECC not possible\n");
BUG();
}
/* Use standard syndrome read/write page function? */
@@ -3993,9 +3991,8 @@ int nand_scan_tail(struct mtd_info *mtd)
}
break;
}
- pr_warn("%d byte HW ECC not possible on "
- "%d byte page size, fallback to SW ECC\n",
- ecc->size, mtd->writesize);
+ pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
+ ecc->size, mtd->writesize);
ecc->mode = NAND_ECC_SOFT;
case NAND_ECC_SOFT:
@@ -4048,8 +4045,7 @@ int nand_scan_tail(struct mtd_info *mtd)
break;
case NAND_ECC_NONE:
- pr_warn("NAND_ECC_NONE selected by board driver. "
- "This is not recommended!\n");
+ pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
ecc->read_page = nand_read_page_raw;
ecc->write_page = nand_write_page_raw;
ecc->read_oob = nand_read_oob_std;
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 443fa82..9bb8453 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -201,12 +201,12 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
res = mtd_read(mtd, from, len, &retlen, buf);
if (res < 0) {
if (mtd_is_eccerr(res)) {
- pr_info("nand_bbt: ECC error in BBT at "
- "0x%012llx\n", from & ~mtd->writesize);
+ pr_info("nand_bbt: ECC error in BBT at 0x%012llx\n",
+ from & ~mtd->writesize);
return res;
} else if (mtd_is_bitflip(res)) {
- pr_info("nand_bbt: corrected error in BBT at "
- "0x%012llx\n", from & ~mtd->writesize);
+ pr_info("nand_bbt: corrected error in BBT at 0x%012llx\n",
+ from & ~mtd->writesize);
ret = res;
} else {
pr_info("nand_bbt: error reading BBT\n");
@@ -580,8 +580,8 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
if (td->pages[i] == -1)
pr_warn("Bad block table not found for chip %d\n", i);
else
- pr_info("Bad block table found at page %d, version "
- "0x%02X\n", td->pages[i], td->version[i]);
+ pr_info("Bad block table found at page %d, version 0x%02X\n",
+ td->pages[i], td->version[i]);
}
return 0;
}
@@ -725,12 +725,10 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
res = mtd_read(mtd, to, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
- pr_info("nand_bbt: error reading block "
- "for writing the bad block table\n");
+ pr_info("nand_bbt: error reading block for writing the bad block table\n");
return res;
}
- pr_warn("nand_bbt: ECC error while reading "
- "block for writing bad block table\n");
+ pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n");
}
/* Read oob data */
ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
@@ -1338,9 +1336,8 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
block = (int)(offs >> this->bbt_erase_shift);
res = bbt_get_entry(this, block);
- pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
- "(block %d) 0x%02x\n",
- (unsigned int)offs, block, res);
+ pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+ (unsigned int)offs, block, res);
switch (res) {
case BBT_BLOCK_GOOD:
--
1.8.4.5
More information about the linux-mtd
mailing list