[PATCH 1/2] mtd: atmel_nand: remove pmecc_sector_number, use ecc.steps instead
Josh Wu
josh.wu at atmel.com
Fri Aug 8 02:12:34 PDT 2014
For PMECC, the pmecc_sector_number has same meaning as ecc.steps.
So use ecc.steps to replace the pmecc_sector_number.
Signed-off-by: Josh Wu <josh.wu at atmel.com>
---
drivers/mtd/nand/atmel_nand.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 9c5f717..1dc3988 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -129,7 +129,6 @@ struct atmel_nand_host {
u32 pmecc_lookup_table_offset_1024;
int pmecc_bytes_per_sector;
- int pmecc_sector_number;
int pmecc_degree; /* Degree of remainders */
int pmecc_cw_len; /* Length of codeword */
@@ -874,7 +873,7 @@ static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
return 0;
normal_check:
- for (i = 0; i < host->pmecc_sector_number; i++) {
+ for (i = 0; i < nand_chip->ecc.steps; i++) {
err_nbr = 0;
if (pmecc_stat & 0x1) {
buf_pos = buf + i * host->pmecc_sector_size;
@@ -984,7 +983,7 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
cpu_relax();
}
- for (i = 0; i < host->pmecc_sector_number; i++) {
+ for (i = 0; i < chip->ecc.steps; i++) {
for (j = 0; j < host->pmecc_bytes_per_sector; j++) {
int pos;
@@ -1031,7 +1030,7 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
else if (host->pmecc_sector_size == 1024)
val |= PMECC_CFG_SECTOR1024;
- switch (host->pmecc_sector_number) {
+ switch (nand_chip->ecc.steps) {
case 1:
val |= PMECC_CFG_PAGE_1SECTOR;
break;
@@ -1184,18 +1183,17 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
host->pmecc_degree = (sector_size == 512) ?
PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14;
host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
- host->pmecc_sector_number = mtd->writesize / sector_size;
host->pmecc_bytes_per_sector = pmecc_get_ecc_bytes(
cap, sector_size);
host->pmecc_alpha_to = pmecc_get_alpha_to(host);
host->pmecc_index_of = host->pmecc_rom_base +
host->pmecc_lookup_table_offset;
- nand_chip->ecc.steps = host->pmecc_sector_number;
nand_chip->ecc.strength = cap;
nand_chip->ecc.bytes = host->pmecc_bytes_per_sector;
- nand_chip->ecc.total = host->pmecc_bytes_per_sector *
- host->pmecc_sector_number;
+ nand_chip->ecc.steps = mtd->writesize / sector_size;
+ nand_chip->ecc.total = nand_chip->ecc.bytes *
+ nand_chip->ecc.steps;
if (nand_chip->ecc.total > mtd->oobsize - 2) {
dev_err(host->dev, "No room for ECC bytes\n");
err_no = -EINVAL;
--
1.9.1
More information about the linux-mtd
mailing list