[PATCH 3/8] mtd: spi-nor: move "wait-till-ready" checks into erase/write functions
Brian Norris
computersforpeace at gmail.com
Wed Aug 6 18:16:57 PDT 2014
We shouldn't have *every* function checking if a previous write is
complete; this should be done synchronously after each write/erase.
Signed-off-by: Brian Norris <computersforpeace at gmail.com>
---
drivers/mtd/spi-nor/spi-nor.c | 36 +++++++++---------------------------
1 file changed, 9 insertions(+), 27 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index d77c93232b76..227e2743203e 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -229,15 +229,8 @@ static int wait_till_ready(struct spi_nor *nor)
*/
static int erase_chip(struct spi_nor *nor)
{
- int ret;
-
dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
- /* Wait until finished previous write command. */
- ret = wait_till_ready(nor);
- if (ret)
- return ret;
-
/* Send write enable, then erase commands. */
write_enable(nor);
@@ -300,6 +293,10 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
goto erase_err;
}
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto erase_err;
+
/* REVISIT in some cases we could speed up erasing large regions
* by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K. We may have set up
* to use "small sector erase", but that's not always optimal.
@@ -315,6 +312,10 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
addr += mtd->erasesize;
len -= mtd->erasesize;
+
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto erase_err;
}
}
@@ -342,11 +343,6 @@ static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
if (ret)
return ret;
- /* Wait until finished previous command */
- ret = wait_till_ready(nor);
- if (ret)
- goto err;
-
status_old = read_sr(nor);
if (offset < mtd->size - (mtd->size / 2))
@@ -389,11 +385,6 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
if (ret)
return ret;
- /* Wait until finished previous command */
- ret = wait_till_ready(nor);
- if (ret)
- goto err;
-
status_old = read_sr(nor);
if (offset+len > mtd->size - (mtd->size / 64))
@@ -710,11 +701,6 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
if (ret)
return ret;
- /* Wait until finished previous write command. */
- ret = wait_till_ready(nor);
- if (ret)
- goto time_out;
-
write_enable(nor);
nor->sst_write_second = false;
@@ -786,11 +772,6 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
if (ret)
return ret;
- /* Wait until finished previous write command. */
- ret = wait_till_ready(nor);
- if (ret)
- goto write_err;
-
write_enable(nor);
page_offset = to & (nor->page_size - 1);
@@ -819,6 +800,7 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
}
}
+ ret = spi_nor_wait_till_ready(nor);
write_err:
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
return ret;
--
1.9.1
More information about the linux-mtd
mailing list