[PATCH v3 2/9] mtd: nand: add ONFI timing mode to nand_timings converter
Brian Norris
computersforpeace at gmail.com
Wed Apr 30 11:06:53 PDT 2014
Hi,
On Wed, Mar 12, 2014 at 07:07:37PM +0100, Boris BREZILLON wrote:
> Add a converter to retrieve NAND timings from an ONFI NAND timing mode.
> This only support SDR NAND timings for now.
>
> Signed-off-by: Boris BREZILLON <b.brezillon.dev at gmail.com>
> ---
> drivers/mtd/nand/Makefile | 2 +-
> drivers/mtd/nand/nand_timings.c | 248 +++++++++++++++++++++++++++++++++++++++
> include/linux/mtd/nand.h | 4 +
> 3 files changed, 253 insertions(+), 1 deletion(-)
> create mode 100644 drivers/mtd/nand/nand_timings.c
>
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index c970ce7..0b8a822 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -2,7 +2,7 @@
> # linux/drivers/nand/Makefile
> #
>
> -obj-$(CONFIG_MTD_NAND) += nand.o
> +obj-$(CONFIG_MTD_NAND) += nand.o nand_timings.o
> obj-$(CONFIG_MTD_NAND_ECC) += nand_ecc.o
> obj-$(CONFIG_MTD_NAND_BCH) += nand_bch.o
> obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o nand_hynix.o
This patch doesn't apply to l2-mtd.git. Are you basing this on your
Hynix patches? I thought some (all?) of them were determined
unnecessary. Anyway, please rebase on l2-mtd.git, since there are a
couple of other bits that don't apply properly.
> diff --git a/drivers/mtd/nand/nand_timings.c b/drivers/mtd/nand/nand_timings.c
> new file mode 100644
> index 0000000..f66fe95
> --- /dev/null
> +++ b/drivers/mtd/nand/nand_timings.c
> @@ -0,0 +1,248 @@
> +/*
> + * Copyright (C) 2014 Boris BREZILLON <b.brezillon.dev at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +#include <linux/mtd/nand.h>
> +
> +static const struct nand_sdr_timings onfi_sdr_timings[] = {
> + /* Mode 0 */
> + {
> + .tADL_min = 200000,
> + .tALH_min = 20000,
> + .tALS_min = 50000,
> + .tAR_min = 25000,
> + .tCEA_max = 100000,
> + .tCEH_min = 20000,
> + .tCH_min = 20000,
> + .tCHZ_max = 100000,
> + .tCLH_min = 20000,
> + .tCLR_min = 20000,
> + .tCLS_min = 50000,
> + .tCOH_min = 0,
> + .tCS_min = 70000,
> + .tDH_min = 20000,
> + .tDS_min = 40000,
> + .tFEAT_max = 1000000,
> + .tIR_min = 10000,
> + .tITC_max = 1000000,
> + .tRC_min = 100000,
> + .tREA_max = 40000,
> + .tREH_min = 30000,
> + .tRHOH_min = 0,
> + .tRHW_min = 200000,
> + .tRHZ_max = 200000,
> + .tRLOH_min = 0,
> + .tRP_min = 50000,
> + .tRST_max = 250000000000,
I was initially wary of potential overflow here, but apparently the C
standard (section 6.4.4.1) ensures that literal constants like this will
be promoted to a sufficiently-large type.
> + .tWB_max = 200000,
> + .tRR_min = 40000,
> + .tWC_min = 100000,
> + .tWH_min = 30000,
> + .tWHR_min = 120000,
> + .tWP_min = 50000,
> + .tWW_min = 100000,
> + },
> + /* Mode 1 */
> + {
> + .tADL_min = 100000,
> + .tALH_min = 10000,
> + .tALS_min = 25000,
> + .tAR_min = 10000,
> + .tCEA_max = 45000,
> + .tCEH_min = 20000,
> + .tCH_min = 10000,
> + .tCHZ_max = 50000,
> + .tCLH_min = 10000,
> + .tCLR_min = 10000,
> + .tCLS_min = 25000,
> + .tCOH_min = 15000,
> + .tCS_min = 35000,
> + .tDH_min = 10000,
> + .tDS_min = 20000,
> + .tFEAT_max = 1000000,
> + .tIR_min = 0,
> + .tITC_max = 1000000,
> + .tRC_min = 50000,
> + .tREA_max = 30000,
> + .tREH_min = 15000,
> + .tRHOH_min = 15000,
> + .tRHW_min = 100000,
> + .tRHZ_max = 100000,
> + .tRLOH_min = 0,
> + .tRP_min = 25000,
> + .tRR_min = 20000,
> + .tRST_max = 500000000,
> + .tWB_max = 100000,
> + .tWC_min = 45000,
> + .tWH_min = 15000,
> + .tWHR_min = 80000,
> + .tWP_min = 25000,
> + .tWW_min = 100000,
> + },
> + /* Mode 2 */
> + {
> + .tADL_min = 100000,
> + .tALH_min = 10000,
> + .tALS_min = 15000,
> + .tAR_min = 10000,
> + .tCEA_max = 30000,
> + .tCEH_min = 20000,
> + .tCH_min = 10000,
> + .tCHZ_max = 50000,
> + .tCLH_min = 10000,
> + .tCLR_min = 10000,
> + .tCLS_min = 15000,
> + .tCOH_min = 15000,
> + .tCS_min = 25000,
> + .tDH_min = 5000,
> + .tDS_min = 15000,
> + .tFEAT_max = 1000000,
> + .tIR_min = 0,
> + .tITC_max = 1000000,
> + .tRC_min = 35000,
> + .tREA_max = 25000,
> + .tREH_min = 15000,
> + .tRHOH_min = 15000,
> + .tRHW_min = 100000,
> + .tRHZ_max = 100000,
> + .tRLOH_min = 0,
> + .tRR_min = 20000,
> + .tRST_max = 500000000,
> + .tWB_max = 100000,
> + .tRP_min = 17000,
> + .tWC_min = 35000,
> + .tWH_min = 15000,
> + .tWHR_min = 80000,
> + .tWP_min = 17000,
> + .tWW_min = 100000,
> + },
> + /* Mode 3 */
> + {
> + .tADL_min = 100000,
> + .tALH_min = 5000,
> + .tALS_min = 10000,
> + .tAR_min = 10000,
> + .tCEA_max = 25000,
> + .tCEH_min = 20000,
> + .tCH_min = 5000,
> + .tCHZ_max = 50000,
> + .tCLH_min = 5000,
> + .tCLR_min = 10000,
> + .tCLS_min = 10000,
> + .tCOH_min = 15000,
> + .tCS_min = 25000,
> + .tDH_min = 5000,
> + .tDS_min = 10000,
> + .tFEAT_max = 1000000,
> + .tIR_min = 0,
> + .tITC_max = 1000000,
> + .tRC_min = 30000,
> + .tREA_max = 20000,
> + .tREH_min = 10000,
> + .tRHOH_min = 15000,
> + .tRHW_min = 100000,
> + .tRHZ_max = 100000,
> + .tRLOH_min = 0,
> + .tRP_min = 15000,
> + .tRR_min = 20000,
> + .tRST_max = 500000000,
> + .tWB_max = 100000,
> + .tWC_min = 30000,
> + .tWH_min = 10000,
> + .tWHR_min = 80000,
> + .tWP_min = 15000,
> + .tWW_min = 100000,
> + },
> + /* Mode 4 */
> + {
> + .tADL_min = 70000,
> + .tALH_min = 5000,
> + .tALS_min = 10000,
> + .tAR_min = 10000,
> + .tCEA_max = 25000,
> + .tCEH_min = 20000,
> + .tCH_min = 5000,
> + .tCHZ_max = 30000,
> + .tCLH_min = 5000,
> + .tCLR_min = 10000,
> + .tCLS_min = 10000,
> + .tCOH_min = 15000,
> + .tCS_min = 20000,
> + .tDH_min = 5000,
> + .tDS_min = 10000,
> + .tFEAT_max = 1000000,
> + .tIR_min = 0,
> + .tITC_max = 1000000,
> + .tRC_min = 25000,
> + .tREA_max = 20000,
> + .tREH_min = 10000,
> + .tRHOH_min = 15000,
> + .tRHW_min = 100000,
> + .tRHZ_max = 100000,
> + .tRLOH_min = 5000,
> + .tRP_min = 12000,
> + .tRR_min = 20000,
> + .tRST_max = 500000000,
> + .tWB_max = 100000,
> + .tWC_min = 25000,
> + .tWH_min = 10000,
> + .tWHR_min = 80000,
> + .tWP_min = 12000,
> + .tWW_min = 100000,
> + },
> + /* Mode 5 */
> + {
> + .tADL_min = 70000,
> + .tALH_min = 5000,
> + .tALS_min = 10000,
> + .tAR_min = 10000,
> + .tCEA_max = 25000,
> + .tCEH_min = 20000,
> + .tCH_min = 5000,
> + .tCHZ_max = 30000,
> + .tCLH_min = 5000,
> + .tCLR_min = 10000,
> + .tCLS_min = 10000,
> + .tCOH_min = 15000,
> + .tCS_min = 15000,
> + .tDH_min = 5000,
> + .tDS_min = 7000,
> + .tFEAT_max = 1000000,
> + .tIR_min = 0,
> + .tITC_max = 1000000,
> + .tRC_min = 20000,
> + .tREA_max = 16000,
> + .tREH_min = 7000,
> + .tRHOH_min = 15000,
> + .tRHW_min = 100000,
> + .tRHZ_max = 100000,
> + .tRLOH_min = 5000,
> + .tRP_min = 10000,
> + .tRR_min = 20000,
> + .tRST_max = 500000000,
> + .tWB_max = 100000,
> + .tWC_min = 20000,
> + .tWH_min = 7000,
> + .tWHR_min = 80000,
> + .tWP_min = 10000,
> + .tWW_min = 100000,
> + },
> +};
> +
> +/**
> + * onfi_async_timing_mode_to_sdr_timings - [NAND Interface] Retrieve NAND
> + * timings according to the given ONFI timing mode
> + * @mode: ONFI timing mode
> + */
> +const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode)
> +{
> + if (mode < 0 || mode > ARRAY_SIZE(onfi_sdr_timings))
Should be ">=".
if (mode < 0 || mode >= ARRAY_SIZE(onfi_sdr_timings))
> + return ERR_PTR(-EINVAL);
> +
> + return &onfi_sdr_timings[mode];
> +}
> +EXPORT_SYMBOL(onfi_async_timing_mode_to_sdr_timings);
> diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
> index f3ff3a3..b8e3c2b 100644
> --- a/include/linux/mtd/nand.h
> +++ b/include/linux/mtd/nand.h
> @@ -847,6 +847,7 @@ static inline bool nand_is_slc(struct nand_chip *chip)
> return chip->bits_per_cell == 1;
> }
>
> +
Unnecessary whitespace change.
> /**
> * struct nand_sdr_timings - SDR NAND chip timings
> *
> @@ -895,4 +896,7 @@ struct nand_sdr_timings {
> u32 tWW_min;
> };
>
> +/* convert an ONFI timing mode to its timing characteristics. */
> +const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
> +
> #endif /* __LINUX_MTD_NAND_H */
Brian
More information about the linux-mtd
mailing list