[PATCH RFC v2 1/4] Devicetree: Add pl353 smc controller devicetree binding information
Punnaiah Choudary Kalluri
punnaiah.choudary.kalluri at xilinx.com
Thu Apr 17 12:58:37 PDT 2014
Add pl353 static memory controller devicetree binding information.
Signed-off-by: Punnaiah Choudary Kalluri <punnaia at xilinx.com>
---
Changes in v2:
- modified timing binding info as per onfi timing parameters
- add suffix nano second as timing unit
- modified the clock names as per the IP spec
---
.../bindings/memory-controllers/pl353-smc.txt | 53 ++++++++++++++++++++
1 files changed, 53 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
new file mode 100644
index 0000000..c1f011d
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -0,0 +1,53 @@
+Device tree bindings for ARM PL353 static memory controller
+
+PL353 static memory controller supports two kinds of memory
+interfaces.i.e NAND and SRAM/NOR interfaces.
+The actual devices are instantiated from the child nodes of pl353 smc node.
+
+Required properties:
+- compatible : Should be "arm,pl353-smc-r2p1"
+- reg : Controller registers map and length.
+- clock-names : List of input clock names - "memclk", "aclk"
+ (See clock bindings for details).
+- clocks : Clock phandles (see clock bindings for details).
+- address-cells : Address cells, must be 1.
+- size-cells : Size cells. Must be 1.
+
+Child nodes:
+ For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are
+supported as child nodes.
+
+Mandatory timing properties for child nodes:
+- nand-tRC-ns : Read cycle time.
+- nand-tWC-ns : Write cycle time.
+- nand-tREA-ns : re_n assertion delay.
+- nand-tWP-ns : we_n de-assertion delay.
+- nand-tCLR-ns : Status read time
+- nand-tAR-ns : ID read time
+- nand-tRR-ns : busy to re_n
+
+for nand partition information please refer the below file
+Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+ pl353smcc_0: pl353smcc at e000e000 {
+ compatible = "arm,pl353-smcc-r2p1"
+ clock-names = "memclk", "aclk";
+ clocks = <&clkc 11>, <&clkc 44>;
+ reg = <0xe000e000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ nand_0: nand at e1000000 {
+ compatible = "arm,pl353-nand-r2p1"
+ reg = <0xe1000000 0x1000000>;
+ nand-tRC-ns = <40>;
+ nand-tWC-ns = <40>;
+ nand-tREA-ns = <10>;
+ nand-tWP-ns = <20>;
+ nand-tCLR-ns = <20>;
+ nand-tAR-ns = <20>;
+ nand-tRR-ns = <40>;
+ (...)
+ };
+ };
--
1.7.4
More information about the linux-mtd
mailing list