[PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)
Brian Norris
computersforpeace at gmail.com
Thu Apr 17 00:21:44 PDT 2014
Hi all,
We are introducing a new SPI-NOR library/framework for MTD, to support various
types of SPI-NOR flash controllers which require (or benefit from) intimate
knowledge of the flash interface, rather than just the relatively dumb SPI
interface. This library borrows much of the m25p80 driver for its abstraction
and moves this code into a spi-nor module.
This means CONFIG_M25P80 now has a dependency on CONFIG_MTD_SPI_NOR, which
should be added to the defconfigs. I'm not sure what is the best process for
doing this. Should each $ARCH maintainer just take their respective patch, even
if the MTD_SPI_NOR Kconfig symbol is not defined for them yet? Or should
maintainers plan on merging the relevant SPI-NOR code into their trees during
the development cycle? Or some third option?
Anyway, the patches are here. Please keep general comments to the cover letter,
so all parties can see.
This series is based on the development repo for MTD, in the 'spinor' branch:
git://git.infradead.org/l2-mtd.git +spinor
This series is available in the same repo at:
git://git.infradead.org/l2-mtd.git +defconfigs
I tried locally merging this into linux-next and saw a trivial conflict in
arch/arm/configs/shmobile_defconfig. I can resubmit based on an appropriate
tree, if requested.
Thanks,
Brian
P.S. I was going to purely automatically generate this diff as follows, but
it generated a lot of defconfig noise:
#!/bin/sh
for i in arm blackfin mips powerpc sh
do
for j in `git grep -l M25P80 arch/$i/configs`
do
echo $j
cp $j .config
echo CONFIG_MTD_SPI_NOR=y >> .config
make ARCH=$i savedefconfig
mv defconfig $j
done
done
So I did a mixed approach, where I filtered most of the noise out of the diff.
Brian Norris (5):
ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
blackfin: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
mips: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
sh: defconfig: add MTD_SPI_NOR (new dependency for M25P80)
arch/arm/configs/bockw_defconfig | 2 +-
arch/arm/configs/dove_defconfig | 2 +-
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm/configs/keystone_defconfig | 1 +
arch/arm/configs/kirkwood_defconfig | 1 +
arch/arm/configs/koelsch_defconfig | 1 +
arch/arm/configs/lager_defconfig | 1 +
arch/arm/configs/lpc32xx_defconfig | 2 +-
arch/arm/configs/multi_v5_defconfig | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm/configs/mvebu_v5_defconfig | 1 +
arch/arm/configs/mvebu_v7_defconfig | 1 +
arch/arm/configs/mxs_defconfig | 1 +
arch/arm/configs/sama5_defconfig | 2 +-
arch/arm/configs/shmobile_defconfig | 1 +
arch/arm/configs/tegra_defconfig | 1 +
arch/blackfin/configs/BF526-EZBRD_defconfig | 2 +-
arch/blackfin/configs/BF527-EZKIT-V2_defconfig | 2 +-
arch/blackfin/configs/BF527-EZKIT_defconfig | 2 +-
arch/blackfin/configs/BF548-EZKIT_defconfig | 2 +-
arch/blackfin/configs/BF609-EZKIT_defconfig | 2 +-
arch/blackfin/configs/BlackStamp_defconfig | 3 +--
arch/blackfin/configs/H8606_defconfig | 3 +--
arch/mips/configs/ath79_defconfig | 3 +--
arch/mips/configs/db1xxx_defconfig | 1 +
arch/mips/configs/rt305x_defconfig | 2 +-
arch/powerpc/configs/corenet32_smp_defconfig | 2 +-
arch/powerpc/configs/corenet64_smp_defconfig | 2 +-
arch/powerpc/configs/mpc85xx_defconfig | 2 +-
arch/powerpc/configs/mpc85xx_smp_defconfig | 2 +-
arch/sh/configs/sh7757lcr_defconfig | 2 +-
31 files changed, 31 insertions(+), 21 deletions(-)
--
1.8.3.2
More information about the linux-mtd
mailing list