[PATCH v2 0/4] Allow to specify an ECC scheme through DT

[Ezequiel Garcia]

On Apr 01, Simon Guinot wrote:
> On Fri, Mar 21, 2014 at 08:34:46AM -0300, Ezequiel Garcia wrote:
> > Now that we have agreed on the ECC devicetree binding, here's a patchset
> > that makes pxa3xx-nand driver use it.
> > 
> > This work is required on platforms where the flash device reports a required
> > ECC strength, but that are capable of handling a stronger one. Simon Guinot
> > reported a situation where the vendor provided a bootloader configured with
> > a stronger than required ECC scheme. Without this patches, such a situation
> > would require a hack to make the driver use a specific ECC scheme.
> > 
> > (Simon: it would be great if you can confirm this allows you to remove any hacks).
> 
> Hi Ezequiel,
> 
> I confirm this allows me to configure the ECC strength and step size
> from DT.
> 
> Tested-by: Simon Guinot <simon.guinot at sequanux.org>
> 

Thanks a lot for the test.

Brian, any comments?
-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com