[PATCH 1/2] UBI: Fix error path in scan_pool()

[Richard Weinberger]

Am 26.09.2013 11:25, schrieb Richard Genoud:
> I added some traces and I found that : (dumping ec_header after
> "ubi_io_read_ec_hdr(ubi, pnum, ech, 0); " in ubi_scan_fastmap())
> [    0.812500] UBI: default fastmap pool size: 95
> [    0.820312] UBI: default fastmap WL pool size: 25
> [    0.828125] UBI: attaching mtd2 to ubi0
> [    0.851562] ubi_scan_fastmap:
> [    0.859375] Erase counter header dump:
> [    0.859375]  magic          0x55424923
> [    0.867187]  version        1
> [    0.867187]  ec             1
> [    0.867187]  vid_hdr_offset 2048
> [    0.875000]  data_offset    4096
> [    0.875000]  image_seq      891983656 <- image seq is good.
> [    0.875000]  hdr_crc        0x13cc9a78
> [    0.882812] erase counter header hexdump:
> [    0.882812] 00000000: 55 42 49 23 01 00 00 00 00 00 00 00 00 00 00
> 01 00 00 08 00 00 00 10 00 35 2a 97
> 28 00 00 00 00  UBI#....................5*.(....
> [    0.890625] 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00
> 00 13 cc 9a 78  ...............................x
> [    0.960937] UBI error: scan_pool: bad image seq: 0x0, expected: 0x352a9728

BTW: Do you really print the same PEB as scan_pool() complains about?
Do you know how many PEBs for one fastmap are needed on your target?

Thanks,
//richard