[PATCHv2] drivers: mtd: devices: Add quad read support.

[Sourav Poddar]

On Friday 27 September 2013 08:10 AM, Huang Shijie wrote:
> 于 2013年09月26日 19:21, Sourav Poddar 写道:
>> If the pupose of LUT is to just set the dummy cycles, and vf610-twr
>> hardware state machine does not have have any other dependency
>> on LUT, this patch should work.
> Hi Sourav & David:
>
>    The key issue about the vf610-twr is that:
>    [0] Use the LUT makes the Quadspi driver more efficiency.
>    [1] the vf610-twr needs to know the SPI NOR commands for Page Program.
>        Why? because the driver can not change the size of write-buffer 
> from 256bytes to the 64byte(TXFIFO SIZE).
Not clear about this. But, you will anyway know what you are using from 
the m25p80 side rite?
>    [2] the dummy and other things.
>
Dummy stuffs can be handled from m25p80 side rite? fast read dummy cycle 
support is already there. While,
$subject patch adds it for quad read.
> Mark said the Quadspi is not a SPI controller, instead it is a SPI NOR 
> controller, and Mark suggested me
>  to rewrite the m25p80.c for the Quadspi.
>
> thanks
> Huang Shijie
>
>