[PATCH 07/21] mtd: nand: pxa3xx: Clear cmd buffer #3 (NDCB3) on command start

[Ezequiel Garcia]

Command buffer #3 is not properly cleared and it keeps the last
set value. Fix this by clearing when a command is setup.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
 drivers/mtd/nand/pxa3xx_nand.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 996a47d..d8e4311 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -610,6 +610,7 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
 	info->use_spare		= 1;
 	info->use_dma		= (use_dma) ? 1 : 0;
 	info->retcode		= ERR_NONE;
+	info->ndcb3		= 0;
 	if (info->cs != 0)
 		info->ndcb0 = NDCB0_CSEL;
 	else
@@ -631,7 +632,6 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
 	default:
 		info->ndcb1 = 0;
 		info->ndcb2 = 0;
-		info->ndcb3 = 0;
 		break;
 	}
 
-- 
1.8.1.5