[PATCH 01/12] nand: docg4: use nand_base's default BBT scan

[Mike Dunn]

On 09/04/2013 11:25 AM, Brian Norris wrote:
> There's no point in the low level driver doing the work that nand_base
> already is doing; just let nand_base set the default BBT scanning
> function.
> 
> Signed-off-by: Brian Norris <computersforpeace at gmail.com>
> ---
>  drivers/mtd/nand/docg4.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
> index 548db23..7c38b8a 100644
> --- a/drivers/mtd/nand/docg4.c
> +++ b/drivers/mtd/nand/docg4.c
> @@ -1239,7 +1239,6 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
>  	nand->block_markbad = docg4_block_markbad;
>  	nand->read_buf = docg4_read_buf;
>  	nand->write_buf = docg4_write_buf16;
> -	nand->scan_bbt = nand_default_bbt;
>  	nand->erase_cmd = docg4_erase_block;
>  	nand->ecc.read_page = docg4_read_page;
>  	nand->ecc.write_page = docg4_write_page;
> 

Acked-by: Mike Dunn <mikedunn at newsguy.com>

Not sure why I explicitly set that.  Thanks!