[PATCH 2/3] omap2: gpmc: Introduce gpmc_set_legacy()
Ezequiel Garcia
ezequiel.garcia at free-electrons.com
Sun Oct 27 17:51:47 PDT 2013
Introduce a helper function to complete the setting of some GPMC
parameters, only used when the gpmc is probed from a board file.
As such, it will go away once the DT conversion is completed.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
arch/arm/mach-omap2/gpmc-nand.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index d66b856..9dd40e7 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -65,6 +65,17 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
return 1;
}
+/* This function will go away once the device-tree convertion is complete */
+static void gpmc_set_legacy(struct omap_nand_platform_data *gpmc_nand_data,
+ struct gpmc_settings *s)
+{
+ /* Enable RD PIN Monitoring Reg */
+ if (gpmc_nand_data->dev_ready) {
+ s->wait_on_read = true;
+ s->wait_on_write = true;
+ }
+}
+
int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
struct gpmc_timings *gpmc_t)
{
@@ -100,15 +111,10 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
}
}
- if (gpmc_nand_data->of_node) {
+ if (gpmc_nand_data->of_node)
gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
- } else {
- /* Enable RD PIN Monitoring Reg */
- if (gpmc_nand_data->dev_ready) {
- s.wait_on_read = true;
- s.wait_on_write = true;
- }
- }
+ else
+ gpmc_set_legacy(gpmc_nand_data, &s);
s.device_nand = true;
--
1.8.1.5
More information about the linux-mtd
mailing list