[PATCH v2 3/5] mtd: nand: omap2: Fix OMAP_BCH option dependency

[Gupta, Pekon]

> From: Ezequiel Garcia [mailto:ezequiel.garcia at free-electrons.com]
> Subject: [PATCH v2 3/5] mtd: nand: omap2: Fix OMAP_BCH option
> dependency
> 
> This option does not need to depend in MTD_NAND, for it's enclosed
> under it. Also, it's wrong to make it depend in ARCH_OMAP3 only
> since the controller is used in a wider range of SoCs.
> 
> Instead, just leave the dependency on the OMAP2 driver option.
> 
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
> ---
>  drivers/mtd/nand/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index d885298..8187466 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -95,7 +95,7 @@ config MTD_NAND_OMAP2
>  	  platforms.
> 
>  config MTD_NAND_OMAP_BCH
> -	depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3
> +	depends on MTD_NAND_OMAP2
>  	tristate "Enable support for hardware BCH error correction"
>  	default n
>  	select BCH
> --
> 1.8.1.5

Acked-by: Pekon Gupta <pekon at ti.com>
Reported-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>

with regards, pekon