[PATCH 2/5] mtd: m25p80: remove obsolete FIXME

[Sourav Poddar]

On Thursday 24 October 2013 08:28 AM, Brian Norris wrote:
> The FIXME and NOTE have already been fixed (we have FAST_READ support).
>
> Signed-off-by: Brian Norris<computersforpeace at gmail.com>
Reviewed-by: Sourav Poddar <sourav.poddar at ti.com>
> ---
>   drivers/mtd/devices/m25p80.c | 9 ---------
>   1 file changed, 9 deletions(-)
>
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index 63a95ac..7c4cbad 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -367,10 +367,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
>   	spi_message_init(&m);
>   	memset(t, 0, (sizeof t));
>
> -	/* NOTE:
> -	 * OPCODE_FAST_READ (if available) is faster.
> -	 * Should add 1 byte DUMMY_BYTE.
> -	 */
>   	t[0].tx_buf = flash->command;
>   	t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0);
>   	spi_message_add_tail(&t[0],&m);
> @@ -388,11 +384,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
>   		return 1;
>   	}
>
> -	/* FIXME switch to OPCODE_FAST_READ.  It's required for higher
> -	 * clocks; and at this writing, every chip this driver handles
> -	 * supports that opcode.
> -	 */
> -
>   	/* Set up the write data buffer. */
>   	opcode = flash->read_opcode;
>   	flash->command[0] = opcode;