[PATCH 0/3]Add quad/memory mapped support for SPI flash.

[Sourav Poddar]

Hi Brian,

Thanks for the reply.
On Thursday 24 October 2013 05:52 AM, Brian Norris wrote:
> Hi Sourav,
>
> I must admit, I missed some of this series due to a combination of
> strange Gmail filtering (I just learned that a filter for "PATCH"
> doesn't match "PATCHv3" in Gmail...) and the inconsistent naming in your
> patch series. (I see PATCH, PATCHv3, and RFC/PATCH.) I'll try to prevent
> that in the future.
>
Sorry for this, I tried to keep the tag according to the status of
the patch. I will try to be uniform in my patch subject.
> On Wed, Oct 09, 2013 at 08:54:41PM +0530, Sourav Poddar wrote:
>> This patch add quad/memory mapped support in flash driver(m25p80).
> Does "memory mapped" supoprt need to be in the same series as quad read
> support? Those are very different topics, it seems.
>
Yes, this are different topic and I can send you the quad support
seperately as a single patch ?
>> Added support for quad memory mapped for TI qspi controller also.
>>
>> This patch has been tested with some internal dts data.
> Your patches use new DT bindings which are not documented. If you are
> adding bindings, please document them in
> Documentation/devicetree/bindings/ and CC devicetree at vger.kernel.org.
> (You only need to CC them for the binding documenation, not necessarily
> all your code changes.)
Ok. I will take care of this.
> That being said, I'm not sure you need some of the bindings that you're
> using. I'll comment on the affected patch(es).
>
> Brian