[PATCH 1/2] mtd: nand: pxa3xx: Move DMA I/O enabling

[Ezequiel Garcia]

Instead of setting info->dma each time a command is prepared,
we can move it after the DMA buffers are allocated.

This is more clear and it's the proper place to enable this, given
DMA cannot be turned on and off during runtime.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
 drivers/mtd/nand/pxa3xx_nand.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index dd03dfd..a47c67f 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -540,7 +540,6 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
 	info->oob_size		= 0;
 	info->use_ecc		= 0;
 	info->use_spare		= 1;
-	info->use_dma		= (use_dma) ? 1 : 0;
 	info->is_ready		= 0;
 	info->retcode		= ERR_NONE;
 	if (info->cs != 0)
@@ -950,6 +949,11 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
 		return info->data_dma_ch;
 	}
 
+	/*
+	 * Now that DMA buffers are allocated we turn on
+	 * DMA proper for I/O operations.
+	 */
+	info->use_dma = 1;
 	return 0;
 }
 
-- 
1.8.1.5