[PATCH v3 2/2] mtd: gpmi: change pr_debug to dev_dbg
Huang Shijie
b32955 at freescale.com
Tue Nov 19 21:09:44 EST 2013
change all the pr_debug to dev_dbg.
Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 13 +++++--------
1 files changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 46544ed..e2f5820 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -18,9 +18,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
@@ -884,7 +881,7 @@ static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
struct nand_chip *chip = mtd->priv;
struct gpmi_nand_data *this = chip->priv;
- pr_debug("len is %d\n", len);
+ dev_dbg(this->dev, "len is %d\n", len);
this->upper_buf = buf;
this->upper_len = len;
@@ -896,7 +893,7 @@ static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
struct nand_chip *chip = mtd->priv;
struct gpmi_nand_data *this = chip->priv;
- pr_debug("len is %d\n", len);
+ dev_dbg(this->dev, "len is %d\n", len);
this->upper_buf = (uint8_t *)buf;
this->upper_len = len;
@@ -975,7 +972,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
unsigned int max_bitflips = 0;
int ret;
- pr_debug("page number is : %d\n", page);
+ dev_dbg(this->dev, "page number is : %d\n", page);
ret = read_page_prepare(this, buf, mtd->writesize,
this->payload_virt, this->payload_phys,
nfc_geo->payload_size,
@@ -1051,7 +1048,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
dma_addr_t auxiliary_phys;
int ret;
- pr_debug("ecc write page.\n");
+ dev_dbg(this->dev, "ecc write page.\n");
if (this->swap_block_mark) {
/*
* If control arrives here, we're doing block mark swapping.
@@ -1189,7 +1186,7 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
{
struct gpmi_nand_data *this = chip->priv;
- pr_debug("page number is %d\n", page);
+ dev_dbg(this->dev, "page number is %d\n", page);
/* clear the OOB buffer */
memset(chip->oob_poi, ~0, mtd->oobsize);
--
1.7.2.rc3
More information about the linux-mtd
mailing list