[PATCH] mtd: nand: pxa3xx: make ECC configuration checks more explicit

[Brian Norris]

The Armada BCH configuration in this driver uses one of the two
following ECC schemes:

 16-bit correction per 2048 bytes
 16-bit correction per 1024 bytes

These are sufficient for mapping to the 4-bit per 512-bytes and 8-bit
per 512-bytes (respectively) minimum correctability requirements of many
common NAND.

The current code only checks for the required strength (4-bit or 8-bit)
without checking the ECC step size that is associated with that strength
(and simply assumes it is 512). While that is often a safe assumption to
make, let's make it explicit, since we have that information.

Signed-off-by: Brian Norris <computersforpeace at gmail.com>
Cc: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
 drivers/mtd/nand/pxa3xx_nand.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index cec81f0..3d143fe 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1364,9 +1364,13 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
 
 static int armada370_ecc_init(struct pxa3xx_nand_info *info,
 			      struct nand_ecc_ctrl *ecc,
-			      int strength, int page_size)
+			      int strength, int ecc_stepsize, int page_size)
 {
-	if (strength == 4 && page_size == 4096) {
+	/*
+	 * Required ECC: 4-bit correction per 512 bytes
+	 * Select: 16-bit correction per 2048 bytes
+	 */
+	if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
 		info->ecc_bch = 1;
 		info->chunk_size = 2048;
 		info->spare_size = 32;
@@ -1377,7 +1381,11 @@ static int armada370_ecc_init(struct pxa3xx_nand_info *info,
 		ecc->strength = 16;
 		return 1;
 
-	} else if (strength == 8 && page_size == 4096) {
+	/*
+	 * Required ECC: 8-bit correction per 512 bytes
+	 * Select: 16-bit correction per 1024 bytes
+	 */
+	} else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) {
 		info->ecc_bch = 1;
 		info->chunk_size = 1024;
 		info->spare_size = 0;
@@ -1485,6 +1493,7 @@ KEEP_CONFIG:
 	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
 		ret = armada370_ecc_init(info, &chip->ecc,
 				   chip->ecc_strength_ds,
+				   chip->ecc_step_ds,
 				   mtd->writesize);
 	else
 		ret = pxa_ecc_init(info, &chip->ecc,
-- 
1.8.4.2