[PATCH v5 2/3] mtd: nand: gpio: Use devm_gpio_request_one() where possible
Alexander Shiyan
shc_work at mail.ru
Wed Nov 13 06:58:03 EST 2013
Patch replaces devm_gpio_request() by devm_gpio_request_one()
function and adds a helper for set/clear WP signal. This change
simplify source code a bit.
Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
drivers/mtd/nand/gpio.c | 37 ++++++++++++++++++++-----------------
1 file changed, 20 insertions(+), 17 deletions(-)
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index 8ec731d..a3286c8 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -189,14 +189,20 @@ gpio_nand_get_io_sync(struct platform_device *pdev)
return platform_get_resource(pdev, IORESOURCE_MEM, 1);
}
+static void gpio_nand_set_wp(struct gpiomtd *gpiomtd, int val)
+{
+ if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+ gpio_set_value(gpiomtd->plat.gpio_nwp, val);
+}
+
static int gpio_nand_remove(struct platform_device *pdev)
{
struct gpiomtd *gpiomtd = platform_get_drvdata(pdev);
nand_release(&gpiomtd->mtd_info);
- if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
- gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
+ gpio_nand_set_wp(gpiomtd, 0);
+
gpio_set_value(gpiomtd->plat.gpio_nce, 1);
return 0;
@@ -242,34 +248,33 @@ static int gpio_nand_probe(struct platform_device *pdev)
return PTR_ERR(gpiomtd->io_sync);
}
- ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nce, "NAND NCE");
+ ret = devm_gpio_request_one(&pdev->dev, gpiomtd->plat.gpio_nce,
+ GPIOF_OUT_INIT_HIGH, "NAND NCE");
if (ret)
return ret;
- gpio_direction_output(gpiomtd->plat.gpio_nce, 1);
if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) {
- ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nwp,
- "NAND NWP");
+ ret = devm_gpio_request_one(&pdev->dev, gpiomtd->plat.gpio_nwp,
+ GPIOF_OUT_INIT_LOW, "NAND NWP");
if (ret)
return ret;
}
- ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_ale, "NAND ALE");
+ ret = devm_gpio_request_one(&pdev->dev, gpiomtd->plat.gpio_ale,
+ GPIOF_OUT_INIT_LOW, "NAND ALE");
if (ret)
return ret;
- gpio_direction_output(gpiomtd->plat.gpio_ale, 0);
- ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_cle, "NAND CLE");
+ ret = devm_gpio_request_one(&pdev->dev, gpiomtd->plat.gpio_cle,
+ GPIOF_OUT_INIT_LOW, "NAND CLE");
if (ret)
return ret;
- gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) {
- ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_rdy,
- "NAND RDY");
+ ret = devm_gpio_request_one(&pdev->dev, gpiomtd->plat.gpio_rdy,
+ GPIOF_IN, "NAND RDY");
if (ret)
return ret;
- gpio_direction_input(gpiomtd->plat.gpio_rdy);
chip->dev_ready = gpio_nand_devready;
}
@@ -284,8 +289,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, gpiomtd);
- if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
- gpio_direction_output(gpiomtd->plat.gpio_nwp, 1);
+ gpio_nand_set_wp(gpiomtd, 1);
if (nand_scan(&gpiomtd->mtd_info, 1)) {
ret = -ENXIO;
@@ -304,8 +308,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
return 0;
err_wp:
- if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
- gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
+ gpio_nand_set_wp(gpiomtd, 0);
return ret;
}
--
1.8.1.5
More information about the linux-mtd
mailing list