[PATCH 2/2] mtd: gpmi: only scan two chips for imx6

[Fabio Estevam]

On Thu, Nov 7, 2013 at 7:46 AM, Huang Shijie <b32955 at freescale.com> wrote:
> We cannot scan two chips for imx23 and imx28:
>   imx23: the Ready-Busy1 line is not connected for some board.
>   imx28: we do not set the pinctrl for Ready-Busy1
>
> So we only scan two chips for imx6.

What happens if Ready-Busy1 line is not connected on some mx6 board?
You cannot assume that all boards
have this line connected and configured in pinctrl just like you
mentioned for mx23 and mx28.

Regards,

Fabio Estevam