[PATCH] ubi: attach: do not return -EINVAL if the mtd->numeraseregions is 1

[Huang Shijie]

于 2013年09月18日 10:17, Huang Shijie 写道:
> If the master mtd does not have any slave mtd partitions,
> and its numeraseregions is one(only has one erease block), and
> we attach the master mtd with : ubiattach -m 0 -d 0
>
> We will meet the error:
> -------------------------------------------------------
> root at freescale ~$ ubiattach /dev/ubi_ctrl -m 0 -d 0
> UBI: attaching mtd0 to ubi0
> UBI error: io_init: multiple regions, not implemented
> ubiattach: error!: cannot attach mtd0
>            error 22 (Invalid argument)
> -------------------------------------------------------
>
> In fact, if there is only one "erase block", we should not
> prevent the attach.
>
> This patch fixes it.
>
> Signed-off-by: Huang Shijie <b32955 at freescale.com>
> ---
>  drivers/mtd/ubi/build.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
> index a561335..006f98a 100644
> --- a/drivers/mtd/ubi/build.c
> +++ b/drivers/mtd/ubi/build.c
> @@ -638,7 +638,7 @@ static int io_init(struct ubi_device *ubi, int max_beb_per1024)
>  	dbg_gen("sizeof(struct ubi_ainf_peb) %zu", sizeof(struct ubi_ainf_peb));
>  	dbg_gen("sizeof(struct ubi_wl_entry) %zu", sizeof(struct ubi_wl_entry));
>  
> -	if (ubi->mtd->numeraseregions != 0) {
> +	if (ubi->mtd->numeraseregions > 1) {
>  		/*
>  		 * Some flashes have several erase regions. Different regions
>  		 * may have different eraseblock size and other
hi Artem:

Any comment about this patch?

thanks
Huang Shijie