[PATCH v5 10/11] mtd: add the ecc info for some full-id nand chips

[Huang Shijie]

Add the ecc info for TC58NVG2S0F, TC58NVG3S0F, TC58NVG5D2 and TC58NVG6D2.

>From these chips' datasheets, we know that:
   The TC58NVG2S0F and TC58NVG3S0F require 4bit ECC for per 512byte.
   The TC58NVG5D2 and TC58NVG6D2 require 40bits ECC for per 1024byte.

Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
 drivers/mtd/nand/nand_ids.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 683813a..a87b0a3 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -33,16 +33,16 @@ struct nand_flash_dev nand_flash_ids[] = {
 	 */
 	{"TC58NVG2S0F 4G 3.3V 8-bit",
 		{ .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
-		  SZ_4K, SZ_512, SZ_256K, 0, 8, 224},
+		  SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) },
 	{"TC58NVG3S0F 8G 3.3V 8-bit",
 		{ .id = {0x98, 0xd3, 0x90, 0x26, 0x76, 0x15, 0x02, 0x08} },
-		  SZ_4K, SZ_1K, SZ_256K, 0, 8, 232},
+		  SZ_4K, SZ_1K, SZ_256K, 0, 8, 232, NAND_ECC_INFO(4, SZ_512) },
 	{"TC58NVG5D2 32G 3.3V 8-bit",
 		{ .id = {0x98, 0xd7, 0x94, 0x32, 0x76, 0x56, 0x09, 0x00} },
-		  SZ_8K, SZ_4K, SZ_1M, 0, 8, 640},
+		  SZ_8K, SZ_4K, SZ_1M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) },
 	{"TC58NVG6D2 64G 3.3V 8-bit",
 		{ .id = {0x98, 0xde, 0x94, 0x82, 0x76, 0x56, 0x04, 0x20} },
-		  SZ_8K, SZ_8K, SZ_2M, 0, 8, 640},
+		  SZ_8K, SZ_8K, SZ_2M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) },
 
 	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
 	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
-- 
1.7.1