[PATCH] mtd: onenand: remove OneNAND simulator

Artem Bityutskiy dedekind1 at gmail.com
Thu Mar 14 06:47:29 EDT 2013


From: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>

This commit remove OneNAND simulator on the basis that it is useless.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
---
 drivers/mtd/onenand/Kconfig       |    6 -
 drivers/mtd/onenand/Makefile      |    3 -
 drivers/mtd/onenand/onenand_sim.c |  564 -------------------------------------
 3 files changed, 573 deletions(-)
 delete mode 100644 drivers/mtd/onenand/onenand_sim.c

diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 91467bb..a5c636b 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -68,10 +68,4 @@ config MTD_ONENAND_2X_PROGRAM
 
 	  And more recent chips
 
-config MTD_ONENAND_SIM
-	tristate "OneNAND simulator support"
-	help
-	  The simulator may simulate various OneNAND flash chips for the
-	  OneNAND MTD layer.
-
 endif # MTD_ONENAND
diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
index 2b7884c..9d6540e 100644
--- a/drivers/mtd/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
@@ -10,7 +10,4 @@ obj-$(CONFIG_MTD_ONENAND_GENERIC)	+= generic.o
 obj-$(CONFIG_MTD_ONENAND_OMAP2)		+= omap2.o
 obj-$(CONFIG_MTD_ONENAND_SAMSUNG)       += samsung.o
 
-# Simulator
-obj-$(CONFIG_MTD_ONENAND_SIM)		+= onenand_sim.o
-
 onenand-objs = onenand_base.o onenand_bbt.o
diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c
deleted file mode 100644
index 85399e3..0000000
--- a/drivers/mtd/onenand/onenand_sim.c
+++ /dev/null
@@ -1,564 +0,0 @@
-/*
- *  linux/drivers/mtd/onenand/onenand_sim.c
- *
- *  The OneNAND simulator
- *
- *  Copyright © 2005-2007 Samsung Electronics
- *  Kyungmin Park <kyungmin.park at samsung.com>
- *
- *  Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
- *  Flex-OneNAND simulator support
- *  Copyright (C) Samsung Electronics, 2008
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-
-#include <linux/io.h>
-
-#ifndef CONFIG_ONENAND_SIM_MANUFACTURER
-#define CONFIG_ONENAND_SIM_MANUFACTURER         0xec
-#endif
-
-#ifndef CONFIG_ONENAND_SIM_DEVICE_ID
-#define CONFIG_ONENAND_SIM_DEVICE_ID            0x04
-#endif
-
-#define CONFIG_FLEXONENAND ((CONFIG_ONENAND_SIM_DEVICE_ID >> 9) & 1)
-
-#ifndef CONFIG_ONENAND_SIM_VERSION_ID
-#define CONFIG_ONENAND_SIM_VERSION_ID           0x1e
-#endif
-
-#ifndef CONFIG_ONENAND_SIM_TECHNOLOGY_ID
-#define CONFIG_ONENAND_SIM_TECHNOLOGY_ID CONFIG_FLEXONENAND
-#endif
-
-/* Initial boundary values for Flex-OneNAND Simulator */
-#ifndef CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY
-#define CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY	0x01
-#endif
-
-#ifndef CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY
-#define CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY	0x01
-#endif
-
-static int manuf_id	= CONFIG_ONENAND_SIM_MANUFACTURER;
-static int device_id	= CONFIG_ONENAND_SIM_DEVICE_ID;
-static int version_id	= CONFIG_ONENAND_SIM_VERSION_ID;
-static int technology_id = CONFIG_ONENAND_SIM_TECHNOLOGY_ID;
-static int boundary[] = {
-	CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY,
-	CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY,
-};
-
-struct onenand_flash {
-	void __iomem *base;
-	void __iomem *data;
-};
-
-#define ONENAND_CORE(flash)		(flash->data)
-#define ONENAND_CORE_SPARE(flash, this, offset)				\
-	((flash->data) + (this->chipsize) + (offset >> 5))
-
-#define ONENAND_MAIN_AREA(this, offset)					\
-	(this->base + ONENAND_DATARAM + offset)
-
-#define ONENAND_SPARE_AREA(this, offset)				\
-	(this->base + ONENAND_SPARERAM + offset)
-
-#define ONENAND_GET_WP_STATUS(this)					\
-	(readw(this->base + ONENAND_REG_WP_STATUS))
-
-#define ONENAND_SET_WP_STATUS(v, this)					\
-	(writew(v, this->base + ONENAND_REG_WP_STATUS))
-
-/* It has all 0xff chars */
-#define MAX_ONENAND_PAGESIZE		(4096 + 128)
-static unsigned char *ffchars;
-
-#if CONFIG_FLEXONENAND
-#define PARTITION_NAME "Flex-OneNAND simulator partition"
-#else
-#define PARTITION_NAME "OneNAND simulator partition"
-#endif
-
-static struct mtd_partition os_partitions[] = {
-	{
-		.name		= PARTITION_NAME,
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-/*
- * OneNAND simulator mtd
- */
-struct onenand_info {
-	struct mtd_info		mtd;
-	struct mtd_partition	*parts;
-	struct onenand_chip	onenand;
-	struct onenand_flash	flash;
-};
-
-static struct onenand_info *info;
-
-#define DPRINTK(format, args...)					\
-do {									\
-	printk(KERN_DEBUG "%s[%d]: " format "\n", __func__,		\
-			   __LINE__, ##args);				\
-} while (0)
-
-/**
- * onenand_lock_handle - Handle Lock scheme
- * @this:		OneNAND device structure
- * @cmd:		The command to be sent
- *
- * Send lock command to OneNAND device.
- * The lock scheme depends on chip type.
- */
-static void onenand_lock_handle(struct onenand_chip *this, int cmd)
-{
-	int block_lock_scheme;
-	int status;
-
-	status = ONENAND_GET_WP_STATUS(this);
-	block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK);
-
-	switch (cmd) {
-	case ONENAND_CMD_UNLOCK:
-	case ONENAND_CMD_UNLOCK_ALL:
-		if (block_lock_scheme)
-			ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
-		else
-			ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this);
-		break;
-
-	case ONENAND_CMD_LOCK:
-		if (block_lock_scheme)
-			ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this);
-		else
-			ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this);
-		break;
-
-	case ONENAND_CMD_LOCK_TIGHT:
-		if (block_lock_scheme)
-			ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this);
-		else
-			ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this);
-		break;
-
-	default:
-		break;
-	}
-}
-
-/**
- * onenand_bootram_handle - Handle BootRAM area
- * @this:		OneNAND device structure
- * @cmd:		The command to be sent
- *
- * Emulate BootRAM area. It is possible to do basic operation using BootRAM.
- */
-static void onenand_bootram_handle(struct onenand_chip *this, int cmd)
-{
-	switch (cmd) {
-	case ONENAND_CMD_READID:
-		writew(manuf_id, this->base);
-		writew(device_id, this->base + 2);
-		writew(version_id, this->base + 4);
-		break;
-
-	default:
-		/* REVIST: Handle other commands */
-		break;
-	}
-}
-
-/**
- * onenand_update_interrupt - Set interrupt register
- * @this:         OneNAND device structure
- * @cmd:          The command to be sent
- *
- * Update interrupt register. The status depends on command.
- */
-static void onenand_update_interrupt(struct onenand_chip *this, int cmd)
-{
-	int interrupt = ONENAND_INT_MASTER;
-
-	switch (cmd) {
-	case ONENAND_CMD_READ:
-	case ONENAND_CMD_READOOB:
-		interrupt |= ONENAND_INT_READ;
-		break;
-
-	case ONENAND_CMD_PROG:
-	case ONENAND_CMD_PROGOOB:
-		interrupt |= ONENAND_INT_WRITE;
-		break;
-
-	case ONENAND_CMD_ERASE:
-		interrupt |= ONENAND_INT_ERASE;
-		break;
-
-	case ONENAND_CMD_RESET:
-		interrupt |= ONENAND_INT_RESET;
-		break;
-
-	default:
-		break;
-	}
-
-	writew(interrupt, this->base + ONENAND_REG_INTERRUPT);
-}
-
-/**
- * onenand_check_overwrite - Check if over-write happened
- * @dest:		The destination pointer
- * @src:		The source pointer
- * @count:		The length to be check
- *
- * Returns:		0 on same, otherwise 1
- *
- * Compare the source with destination
- */
-static int onenand_check_overwrite(void *dest, void *src, size_t count)
-{
-	unsigned int *s = (unsigned int *) src;
-	unsigned int *d = (unsigned int *) dest;
-	int i;
-
-	count >>= 2;
-	for (i = 0; i < count; i++)
-		if ((*s++ ^ *d++) != 0)
-			return 1;
-
-	return 0;
-}
-
-/**
- * onenand_data_handle - Handle OneNAND Core and DataRAM
- * @this:		OneNAND device structure
- * @cmd:		The command to be sent
- * @dataram:		Which dataram used
- * @offset:		The offset to OneNAND Core
- *
- * Copy data from OneNAND Core to DataRAM (read)
- * Copy data from DataRAM to OneNAND Core (write)
- * Erase the OneNAND Core (erase)
- */
-static void onenand_data_handle(struct onenand_chip *this, int cmd,
-				int dataram, unsigned int offset)
-{
-	struct mtd_info *mtd = &info->mtd;
-	struct onenand_flash *flash = this->priv;
-	int main_offset, spare_offset, die = 0;
-	void __iomem *src;
-	void __iomem *dest;
-	unsigned int i;
-	static int pi_operation;
-	int erasesize, rgn;
-
-	if (dataram) {
-		main_offset = mtd->writesize;
-		spare_offset = mtd->oobsize;
-	} else {
-		main_offset = 0;
-		spare_offset = 0;
-	}
-
-	if (pi_operation) {
-		die = readw(this->base + ONENAND_REG_START_ADDRESS2);
-		die >>= ONENAND_DDP_SHIFT;
-	}
-
-	switch (cmd) {
-	case FLEXONENAND_CMD_PI_ACCESS:
-		pi_operation = 1;
-		break;
-
-	case ONENAND_CMD_RESET:
-		pi_operation = 0;
-		break;
-
-	case ONENAND_CMD_READ:
-		src = ONENAND_CORE(flash) + offset;
-		dest = ONENAND_MAIN_AREA(this, main_offset);
-		if (pi_operation) {
-			writew(boundary[die], this->base + ONENAND_DATARAM);
-			break;
-		}
-		memcpy(dest, src, mtd->writesize);
-		/* Fall through */
-
-	case ONENAND_CMD_READOOB:
-		src = ONENAND_CORE_SPARE(flash, this, offset);
-		dest = ONENAND_SPARE_AREA(this, spare_offset);
-		memcpy(dest, src, mtd->oobsize);
-		break;
-
-	case ONENAND_CMD_PROG:
-		src = ONENAND_MAIN_AREA(this, main_offset);
-		dest = ONENAND_CORE(flash) + offset;
-		if (pi_operation) {
-			boundary[die] = readw(this->base + ONENAND_DATARAM);
-			break;
-		}
-		/* To handle partial write */
-		for (i = 0; i < (1 << mtd->subpage_sft); i++) {
-			int off = i * this->subpagesize;
-			if (!memcmp(src + off, ffchars, this->subpagesize))
-				continue;
-			if (memcmp(dest + off, ffchars, this->subpagesize) &&
-			    onenand_check_overwrite(dest + off, src + off, this->subpagesize))
-				printk(KERN_ERR "over-write happened at 0x%08x\n", offset);
-			memcpy(dest + off, src + off, this->subpagesize);
-		}
-		/* Fall through */
-
-	case ONENAND_CMD_PROGOOB:
-		src = ONENAND_SPARE_AREA(this, spare_offset);
-		/* Check all data is 0xff chars */
-		if (!memcmp(src, ffchars, mtd->oobsize))
-			break;
-
-		dest = ONENAND_CORE_SPARE(flash, this, offset);
-		if (memcmp(dest, ffchars, mtd->oobsize) &&
-		    onenand_check_overwrite(dest, src, mtd->oobsize))
-			printk(KERN_ERR "OOB: over-write happened at 0x%08x\n",
-			       offset);
-		memcpy(dest, src, mtd->oobsize);
-		break;
-
-	case ONENAND_CMD_ERASE:
-		if (pi_operation)
-			break;
-
-		if (FLEXONENAND(this)) {
-			rgn = flexonenand_region(mtd, offset);
-			erasesize = mtd->eraseregions[rgn].erasesize;
-		} else
-			erasesize = mtd->erasesize;
-
-		memset(ONENAND_CORE(flash) + offset, 0xff, erasesize);
-		memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
-		       (erasesize >> 5));
-		break;
-
-	default:
-		break;
-	}
-}
-
-/**
- * onenand_command_handle - Handle command
- * @this:		OneNAND device structure
- * @cmd:		The command to be sent
- *
- * Emulate OneNAND command.
- */
-static void onenand_command_handle(struct onenand_chip *this, int cmd)
-{
-	unsigned long offset = 0;
-	int block = -1, page = -1, bufferram = -1;
-	int dataram = 0;
-
-	switch (cmd) {
-	case ONENAND_CMD_UNLOCK:
-	case ONENAND_CMD_LOCK:
-	case ONENAND_CMD_LOCK_TIGHT:
-	case ONENAND_CMD_UNLOCK_ALL:
-		onenand_lock_handle(this, cmd);
-		break;
-
-	case ONENAND_CMD_BUFFERRAM:
-		/* Do nothing */
-		return;
-
-	default:
-		block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1);
-		if (block & (1 << ONENAND_DDP_SHIFT)) {
-			block &= ~(1 << ONENAND_DDP_SHIFT);
-			/* The half of chip block */
-			block += this->chipsize >> (this->erase_shift + 1);
-		}
-		if (cmd == ONENAND_CMD_ERASE)
-			break;
-
-		page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8);
-		page = (page >> ONENAND_FPA_SHIFT);
-		bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER);
-		bufferram >>= ONENAND_BSA_SHIFT;
-		bufferram &= ONENAND_BSA_DATARAM1;
-		dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0;
-		break;
-	}
-
-	if (block != -1)
-		offset = onenand_addr(this, block);
-
-	if (page != -1)
-		offset += page << this->page_shift;
-
-	onenand_data_handle(this, cmd, dataram, offset);
-
-	onenand_update_interrupt(this, cmd);
-}
-
-/**
- * onenand_writew - [OneNAND Interface] Emulate write operation
- * @value:		value to write
- * @addr:		address to write
- *
- * Write OneNAND register with value
- */
-static void onenand_writew(unsigned short value, void __iomem * addr)
-{
-	struct onenand_chip *this = info->mtd.priv;
-
-	/* BootRAM handling */
-	if (addr < this->base + ONENAND_DATARAM) {
-		onenand_bootram_handle(this, value);
-		return;
-	}
-	/* Command handling */
-	if (addr == this->base + ONENAND_REG_COMMAND)
-		onenand_command_handle(this, value);
-
-	writew(value, addr);
-}
-
-/**
- * flash_init - Initialize OneNAND simulator
- * @flash:		OneNAND simulator data strucutres
- *
- * Initialize OneNAND simulator.
- */
-static int __init flash_init(struct onenand_flash *flash)
-{
-	int density, size;
-	int buffer_size;
-
-	flash->base = kzalloc(131072, GFP_KERNEL);
-	if (!flash->base) {
-		printk(KERN_ERR "Unable to allocate base address.\n");
-		return -ENOMEM;
-	}
-
-	density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
-	density &= ONENAND_DEVICE_DENSITY_MASK;
-	size = ((16 << 20) << density);
-
-	ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
-	if (!ONENAND_CORE(flash)) {
-		printk(KERN_ERR "Unable to allocate nand core address.\n");
-		kfree(flash->base);
-		return -ENOMEM;
-	}
-
-	memset(ONENAND_CORE(flash), 0xff, size + (size >> 5));
-
-	/* Setup registers */
-	writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
-	writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
-	writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
-	writew(technology_id, flash->base + ONENAND_REG_TECHNOLOGY);
-
-	if (density < 2 && (!CONFIG_FLEXONENAND))
-		buffer_size = 0x0400;	/* 1KiB page */
-	else
-		buffer_size = 0x0800;	/* 2KiB page */
-	writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE);
-
-	return 0;
-}
-
-/**
- * flash_exit - Clean up OneNAND simulator
- * @flash:		OneNAND simulator data structures
- *
- * Clean up OneNAND simulator.
- */
-static void flash_exit(struct onenand_flash *flash)
-{
-	vfree(ONENAND_CORE(flash));
-	kfree(flash->base);
-}
-
-static int __init onenand_sim_init(void)
-{
-	/* Allocate all 0xff chars pointer */
-	ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL);
-	if (!ffchars) {
-		printk(KERN_ERR "Unable to allocate ff chars.\n");
-		return -ENOMEM;
-	}
-	memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE);
-
-	/* Allocate OneNAND simulator mtd pointer */
-	info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
-	if (!info) {
-		printk(KERN_ERR "Unable to allocate core structures.\n");
-		kfree(ffchars);
-		return -ENOMEM;
-	}
-
-	/* Override write_word function */
-	info->onenand.write_word = onenand_writew;
-
-	if (flash_init(&info->flash)) {
-		printk(KERN_ERR "Unable to allocate flash.\n");
-		kfree(ffchars);
-		kfree(info);
-		return -ENOMEM;
-	}
-
-	info->parts = os_partitions;
-
-	info->onenand.base = info->flash.base;
-	info->onenand.priv = &info->flash;
-
-	info->mtd.name = "OneNAND simulator";
-	info->mtd.priv = &info->onenand;
-	info->mtd.owner = THIS_MODULE;
-
-	if (onenand_scan(&info->mtd, 1)) {
-		flash_exit(&info->flash);
-		kfree(ffchars);
-		kfree(info);
-		return -ENXIO;
-	}
-
-	mtd_device_register(&info->mtd, info->parts,
-			    ARRAY_SIZE(os_partitions));
-
-	return 0;
-}
-
-static void __exit onenand_sim_exit(void)
-{
-	struct onenand_chip *this = info->mtd.priv;
-	struct onenand_flash *flash = this->priv;
-
-	onenand_release(&info->mtd);
-	flash_exit(flash);
-	kfree(ffchars);
-	kfree(info);
-}
-
-module_init(onenand_sim_init);
-module_exit(onenand_sim_exit);
-
-MODULE_AUTHOR("Kyungmin Park <kyungmin.park at samsung.com>");
-MODULE_DESCRIPTION("The OneNAND flash simulator");
-MODULE_LICENSE("GPL");
-- 
1.7.10.4




More information about the linux-mtd mailing list