[PATCH v5 1/3] mtd: add a new field for nand_flash_dev{}

[Huang Shijie]

As time goes on, we begin to meet the situation that we can not get enough
information from some nand chips's id data. Take some Toshiba's nand chips
for example. I have 4 Toshiba's nand chips in my hand:
	TC58NVG2S0F, TC58NVG3S0F, TC58NVG5D2, TC58NVG6D2

When we read these chips' datasheets, we will get the geometry of these chips:
	TC58NVG2S0F : 4096 + 224
	TC58NVG3S0F : 4096 + 232
	TC58NVG5D2  : 8192 + 640
	TC58NVG6D2  : 8192 + 640

But we can not parse out the correct oob size for these chips from the id data.

This patch adds @oobsize for the nand_flash_dev{} to store the oob size for
these nands.

Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
 include/linux/mtd/nand.h |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index e2c7173..42862e9 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -581,6 +581,7 @@ struct nand_chip {
  * @chipsize: total chip size in MiB
  * @erasesize: eraseblock size in bytes (determined from the extended ID if 0)
  * @options: stores various chip bit options
+ * @oobsize: OOB size
  */
 struct nand_flash_dev {
 	char *name;
@@ -595,6 +596,7 @@ struct nand_flash_dev {
 	unsigned int chipsize;
 	unsigned int erasesize;
 	unsigned int options;
+	unsigned int oobsize;
 };
 
 /**
-- 
1.7.1