[PATCH] mtd/nand: don't use {read,write}_buf for 8-bit transfers

[Matthieu CASTET]

Huang Shijie a écrit :
> 于 2013年02月27日 23:10, Uwe Kleine-König 写道:
>> According to the Open NAND Flash Interface Specification (ONFI) Revision
>> 3.1 "Parameters are always transferred on the lower 8-bits of the data
>> bus." for the Get Features and Set Features commands.
>>
> yes. the set/get features should works in 8-bit.
> 
> I have never met a 16-bit onfi nand yet. :)

Beagle board got one.


Matthieu