[PATCH 4/4] mtd: nand: remove NAND_BBT_SCANEMPTY

[Brian Norris]

NAND_BBT_SCANEMPTY is a strange, badly-supported option with omap as its
single remaining user.

NAND_BBT_SCANEMPTY was likely used by accident in omap2[1]. And anyway,
omap2 doesn't scan the chip for bad blocks (courtesy of
NAND_SKIP_BBTSCAN), and so its use of this option is irrelevant.

This patch drops the NAND_BBT_SCANEMPTY option.

[1] http://lists.infradead.org/pipermail/linux-mtd/2012-July/042902.html

Signed-off-by: Brian Norris <computersforpeace at gmail.com>
Cc: Ivan Djelic <ivan.djelic at parrot.com>
---
 Documentation/DocBook/mtdnand.tmpl |  2 --
 drivers/mtd/nand/nand_bbt.c        | 33 +++++----------------------------
 drivers/mtd/nand/omap2.c           |  2 +-
 drivers/mtd/onenand/onenand_bbt.c  |  1 -
 include/linux/mtd/bbm.h            |  2 --
 5 files changed, 6 insertions(+), 34 deletions(-)

diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index fe122d6..a248f42 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -1224,8 +1224,6 @@ in this page</entry>
 #define NAND_BBT_CREATE		0x00000200
 /* Search good / bad pattern through all pages of a block */
 #define NAND_BBT_SCANALLPAGES	0x00000400
-/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY	0x00000800
 /* Write bbt if neccecary */
 #define NAND_BBT_WRITE		0x00001000
 /* Read and write back block contents when writing bbt */
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index ae3fb58..bc06196 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -110,33 +110,17 @@ static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
  * @td: search pattern descriptor
  *
  * Check for a pattern at the given place. Used to search bad block tables and
- * good / bad block identifiers. If the SCAN_EMPTY option is set then check, if
- * all bytes except the pattern area contain 0xff.
+ * good / bad block identifiers.
  */
 static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
 {
-	int end = 0;
-	uint8_t *p = buf;
-
 	if (td->options & NAND_BBT_NO_OOB)
 		return check_pattern_no_oob(buf, td);
 
-	end = paglen + td->offs;
-	if (td->options & NAND_BBT_SCANEMPTY)
-		if (memchr_inv(p, 0xff, end))
-			return -1;
-	p += end;
-
 	/* Compare the pattern */
-	if (memcmp(p, td->pattern, td->len))
+	if (memcmp(buf + paglen + td->offs, td->pattern, td->len))
 		return -1;
 
-	if (td->options & NAND_BBT_SCANEMPTY) {
-		p += td->len;
-		end += td->len;
-		if (memchr_inv(p, 0xff, len - end))
-			return -1;
-	}
 	return 0;
 }
 
@@ -507,15 +491,9 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
 	else
 		numpages = 1;
 
-	if (!(bd->options & NAND_BBT_SCANEMPTY)) {
-		/* We need only read few bytes from the OOB area */
-		scanlen = 0;
-		readlen = bd->len;
-	} else {
-		/* Full page content should be read */
-		scanlen = mtd->writesize + mtd->oobsize;
-		readlen = numpages * mtd->writesize;
-	}
+	/* We need only read few bytes from the OOB area */
+	scanlen = 0;
+	readlen = bd->len;
 
 	if (chip == -1) {
 		numblocks = mtd->size >> this->bbt_erase_shift;
@@ -882,7 +860,6 @@ static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *b
 {
 	struct nand_chip *this = mtd->priv;
 
-	bd->options &= ~NAND_BBT_SCANEMPTY;
 	return create_bbt(mtd, this->buffers->databuf, bd, -1);
 }
 
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index c4c7e0d..d6b9cc1 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -159,7 +159,7 @@ static struct nand_ecclayout omap_oobinfo;
  */
 static uint8_t scan_ff_pattern[] = { 0xff };
 static struct nand_bbt_descr bb_descrip_flashbased = {
-	.options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
+	.options = NAND_BBT_SCANALLPAGES,
 	.offs = 0,
 	.len = 1,
 	.pattern = scan_ff_pattern,
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index 66fe3b7..08d0085 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -133,7 +133,6 @@ static inline int onenand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_desc
 {
 	struct onenand_chip *this = mtd->priv;
 
-        bd->options &= ~NAND_BBT_SCANEMPTY;
 	return create_bbt(mtd, this->page_buf, bd, -1);
 }
 
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 211ff67..95fc482 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -93,8 +93,6 @@ struct nand_bbt_descr {
 #define NAND_BBT_CREATE_EMPTY	0x00000400
 /* Search good / bad pattern through all pages of a block */
 #define NAND_BBT_SCANALLPAGES	0x00000800
-/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY	0x00001000
 /* Write bbt if neccecary */
 #define NAND_BBT_WRITE		0x00002000
 /* Read and write back block contents when writing bbt */
-- 
1.8.3.2