[PATCH] mtd: mxc_nand: compress ID info for send_read_id_v3

[Shawn Guo]

On Thu, Jan 17, 2013 at 12:55:43PM +0200, Artem Bityutskiy wrote:
> On Tue, 2013-01-15 at 16:56 +0100, Roman Schneider wrote:
> > ---
> >  Also compress the id in case of a v3 NAND flash controller (i.mx51, i.mx53)
> >  and 16Bit buswidth.
> 
> Unfortunately I cannot compile-test it with the configuration I have.
> This is not your fault, just a breakage in upstream. I'll wait when this

It's my fault.  Please see if patch [1] fixes the problem with your
configuration.

Shawn

[1] http://article.gmane.org/gmane.linux.ports.arm.kernel/209206

> is fixed upstream, and then take a look at your patch. The breakage is:
> 
> arch/arm/mach-imx/built-in.o: In function `imx6q_restart':
> platform-spi_imx.c:(.text+0x2220): undefined reference to `imx_src_prepare_restart'
> arch/arm/mach-imx/built-in.o: In function `imx6q_pm_enter':
> platform-spi_imx.c:(.text+0x22e4): undefined reference to `imx_set_cpu_jump'
> arch/arm/mach-imx/built-in.o: In function `imx6q_init_irq':
> platform-spi_imx.c:(.init.text+0x7280): undefined reference to `imx_src_init'
> make[1]: *** [vmlinux] Error 1
> 
> -- 
> Best Regards,
> Artem Bityutskiy