[PATCH v4 1/2] mtd/uclinux: support ROM and allow passing the base address
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Wed Jan 16 09:36:55 EST 2013
This allows to put the filesystem at a defined address in ROM allowing
to save more precious RAM.
I think it's safe to default to ROM because the intention of using the
uclinux map is to use a romfs and so mtd-ram doesn't give you anything
that mtd-rom doesn't.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
Changes since v3,
id:1357835498-23904-1-git-send-email-u.kleine-koenig at pengutronix.de:
- drop runtime warning
- only probe one of map_rom or map_ram as both should succeed in the
same cases
Changes since v2,
id:1350027693-19528-1-git-send-email-u.kleine-koenig at pengutronix.de:
- drop a few "ram"s from printks instead of making them "ram/rom".
- fix a typo in the commit log and add rational for the introduced
warning.
Changes since v1,
id:1349709952-4332-1-git-send-email-u.kleine-koenig at pengutronix.de:
- don't make uclinux_ram_map static as pointed out by Mike and Greg.
---
drivers/mtd/maps/Kconfig | 2 +-
drivers/mtd/maps/uclinux.c | 24 +++++++++++++++++++-----
2 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 62ba82c..3ed17c4 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -429,7 +429,7 @@ config MTD_GPIO_ADDR
config MTD_UCLINUX
bool "Generic uClinux RAM/ROM filesystem support"
- depends on MTD_RAM=y && (!MMU || COLDFIRE)
+ depends on (MTD_RAM=y || MTD_ROM=y) && (!MMU || COLDFIRE)
help
Map driver to support image based filesystems for uClinux.
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 299bf88..f56d0aa 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -23,12 +23,20 @@
/****************************************************************************/
+#ifdef CONFIG_MTD_ROM
+#define MAP_NAME "rom"
+#else
+#define MAP_NAME "ram"
+#endif
+
struct map_info uclinux_ram_map = {
- .name = "RAM",
- .phys = (unsigned long)__bss_stop,
+ .name = MAP_NAME,
.size = 0,
};
+static unsigned long physaddr = -1;
+module_param(physaddr, ulong, S_IRUGO);
+
static struct mtd_info *uclinux_ram_mtdinfo;
/****************************************************************************/
@@ -60,11 +68,17 @@ static int __init uclinux_mtd_init(void)
struct map_info *mapp;
mapp = &uclinux_ram_map;
+
+ if (physaddr == -1)
+ mapp->phys = (resource_size_t)__bss_stop;
+ else
+ mapp->phys = physaddr;
+
if (!mapp->size)
mapp->size = PAGE_ALIGN(ntohl(*((unsigned long *)(mapp->phys + 8))));
mapp->bankwidth = 4;
- printk("uclinux[mtd]: RAM probe address=0x%x size=0x%x\n",
+ printk("uclinux[mtd]: probe address=0x%x size=0x%x\n",
(int) mapp->phys, (int) mapp->size);
/*
@@ -82,7 +96,7 @@ static int __init uclinux_mtd_init(void)
simple_map_init(mapp);
- mtd = do_map_probe("map_ram", mapp);
+ mtd = do_map_probe("map_" MAP_NAME, mapp);
if (!mtd) {
printk("uclinux[mtd]: failed to find a mapping?\n");
return(-ENXIO);
@@ -118,6 +132,6 @@ module_exit(uclinux_mtd_cleanup);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Greg Ungerer <gerg at snapgear.com>");
-MODULE_DESCRIPTION("Generic RAM based MTD for uClinux");
+MODULE_DESCRIPTION("Generic MTD for uClinux");
/****************************************************************************/
--
1.7.10.4
More information about the linux-mtd
mailing list