[PATCH] mtd: nand: onfi don't WARN if we are in 16 bits mode

[Matthieu CASTET]

ff3206b2450499203532af2505a7f6f8413e92c0 adds a WARN if the onfi probe is
in 16 bits mode.
This allows to detect driver that need to be fixed, but this is a bit noisy [1].
Transform the WARN in a pr_err.

[1]
http://article.gmane.org/gmane.linux.ports.arm.omap/91317

Signed-off-by: Matthieu CASTET <matthieu.castet at parrot.com>
---
 drivers/mtd/nand/nand_base.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 8323ac9..3766682 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2857,8 +2857,11 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 	int i;
 	int val;
 
-	/* ONFI need to be probed in 8 bits mode */
-	WARN_ON(chip->options & NAND_BUSWIDTH_16);
+	/* ONFI need to be probed in 8 bits mode, and 16 bits should be selected with NAND_BUSWIDTH_AUTO */
+	if (chip->options & NAND_BUSWIDTH_16) {
+		pr_err("Trying ONFI probe in 16 bits mode, aborting !\n");
+		return 0;
+	}
 	/* Try ONFI for unknown chip or LP */
 	chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
 	if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
-- 
1.7.10.4